Craghoppers Ossus Waterproof Jacket - Grey - 8

The Craghoppers Ossus is a waterproof shell jacket. While it provides excellent protection against rain and wind year-round, it offers no significant insulation. For extreme cold or winter, it must be worn over appropriate insulating layers (e.g., fleece, down jacket) to provide warmth.

Regular care is key. Wash the jacket using a technical cleaner for waterproof fabrics and avoid fabric softeners. Periodically, reactivate the DWR finish by tumble drying on low heat, or reapply a DWR treatment if water no longer beads on the surface.

AquaDry Membrane is Craghoppers' proprietary waterproof and breathable fabric technology. It features a microporous membrane that prevents water droplets from entering while allowing water vapor (perspiration) to escape, keeping you dry from both the elements and your own activity.

Info needed: The product description does not specify details regarding packability, internal pockets, or other specific storage features. Please refer to the product's full specifications for this information.

It is recommended to consult Craghoppers' official size guide for accurate measurements. As a shell jacket, it is generally designed to accommodate light to medium layering underneath, so consider your typical layering preferences when choosing your size.

No, it's strongly advised to avoid regular laundry detergents. These often contain additives like fabric softeners or optical brighteners that can clog the pores of the AquaDry Membrane, reducing its breathability and waterproof performance. Always use a specialist technical wash for waterproof garments.

This often indicates that the Durable Water Repellent (DWR) finish needs to be reactivated or reapplied. Wash the jacket with a specialist technical cleaner designed for waterproof garments, then tumble dry on a low heat setting if recommended by the care label. If issues persist, consider applying a spray-on or wash-in DWR treatment.

This can be a sign of reduced breathability. Ensure you are wearing appropriate layers underneath; non-breathable layers can trap moisture. Also, a 'wetted out' DWR finish can reduce breathability. Follow the DWR reapplication steps mentioned above. Make sure the jacket's vents (if any) are open when active.

Check for any fabric caught in the zipper teeth and gently free it. Clean the zipper teeth with a small brush to remove dirt or debris. If still stiff, apply a small amount of a silicone-based zipper lubricant or wax along the teeth.

Wash the jacket according to the care instructions using a technical wash that targets odors. Ensure the jacket is thoroughly dried inside out before storage. Avoid leaving damp garments crumpled for extended periods.