Everbuild Silicone 825 - Cream - 380Ml

It is primarily used for sealing expansion joints in masonry and for perimeter pointing around window and door frames.

It is suitable for high-moving joints up to 50mm wide.

The skinning time is between 30 and 45 minutes, allowing ample time for tooling.

Yes, once cured, it is completely weatherproof with excellent UV resistance, making it suitable for external applications.

It adheres well to a wide range of materials including PVCu, plastic, copper, zinc, glazing, aluminium, and masonry.

It is compatible with most paints when fully cured, but a test patch is recommended before full application.

Store tubes in a cool, dry place away from direct sunlight.

No, it is supplied in a standard 380ml tube and requires a standard sealant gun for application.

Ensure the tube's inner seal has been punctured and the sealant gun's release mechanism is disengaged before pulling the trigger.

Verify that surfaces are clean, dry, and free from dust, grease, or loose material. Re-clean and reapply if necessary.

Ensure the sealant is applied evenly and that the joint width does not exceed 50mm. Check product specifications for maximum joint size.

Use masking tape to create clean edges before application. Tool the bead within the 30-45 minute skinning time using a wet tool or finger dipped in soapy water for a smooth finish.

Ensure adequate ventilation and that application conditions are within the recommended temperature and humidity ranges. Avoid applying too thick a bead.