Pan Head Spring Toggle - Diall

Refer to the product specifications for the correct hole size. Incorrect hole size can affect performance and security.

The maximum weight capacity is specified on the product packaging. Always ensure that the weight of the item being secured does not exceed this limit.

These toggles are primarily designed for use in plasterboard. While they might be used in solid walls, you'll need to pre-drill the correct size hole.

If the toggle spins, the hole is likely too large. You can try a larger toggle or use a wall filler to reduce the hole size before reinstalling.

These toggles are made of carbon steel, so they are suitable for indoor use. For outdoor applications, consider using stainless steel alternatives to prevent corrosion.

If possible, unscrew the item attached to the toggle and push the toggle through the wall. Otherwise, you may need to break off the wings inside the wall, push the remaining part through, and then patch the hole.

Please refer to the product packaging or your point of purchase for warranty information. This will vary depending on your retailer.

While it's possible to reuse them if they are in good condition, it's generally recommended to use new toggles for optimal performance and safety.

Ensure the hole size is correct. If the hole is too large, consider using a larger toggle or filling the hole with an appropriate filler material.

Double-check that the toggle is fully expanded behind the wall. Try tightening it further, but do not overtighten, which could damage the plasterboard.

Ensure the toggle wings have enough space to expand behind the wall. Check for obstructions within the wall cavity.