Fischer FFS Frame Fixing Screw - 7.5 x 112mm - Silver

The fischer window frame screw FFS with flat head is a special screw for cost-effective assembly o...

Best current price£41.27from Blueperry agriculture (UK)

One Offer

1 offer from £41.27

View price history by clicking the chart icon.

Blueperry agriculture (UK)Fischer Window Frame Screw Ffs 7.5X112 T30 100Pcs 532932
Free delivery in 1–3 days
£41.27
Visit shop

Product Information

Full details

The Fischer FFS Frame Fixing Screw is designed for professional contractors and serious DIY enthusiasts who require a reliable, stress-free method for installing window frames. By utilizing a specialized continuous thread design, these screws allow for direct installation into various substrates including concrete, wood, and plastic without pulling the frame against the surface, ensuring a durable finish; however, users must ensure they have a T30 Torx bit and a masonry drill bit of the correct diameter to facilitate the direct-drive installation process.

All features

ColourSilver
Model Part Number61552
BrandFischer

Extended Product Information

FAQs

Does this screw require a wall plug?

No, the Fischer FFS is designed for direct installation into masonry and wood without the need for additional wall plugs.

What size drill bit should I use for concrete?

Generally, a 6.0mm masonry drill bit is required for a 7.5mm FFS screw, but always check the specific technical requirements for your base material.

Can these be used for aluminium frames?

Yes, they are suitable for use with aluminium, provided the frame profile allows for the screw head to seat properly.

What happens if I over-tighten the screw?

While the thread design helps prevent bowing, excessive force can still damage the substrate or strip the screw head; tighten until firm but avoid overtightening.

How many screws are in the box?

This pack contains 100 individual screws.

Troubleshooting

Screw is difficult to drive into the material

Verify that the pre-drilled hole is the correct diameter and that all drilling dust has been cleared from the hole.

The Torx head is slipping (cam-out)

Ensure you are using a high-quality, non-worn T30 bit and that the bit is fully seated into the screw head before applying pressure.

Frame is bowing during installation

Ensure that the frame is properly shimmed or spaced from the wall to prevent the screw from pulling the profile inward.

Pros and Cons

Pros

  • Prevents frame distortion through stress-free mounting
  • Compatible with a wide variety of construction materials
  • Torx drive ensures efficient power transmission
  • Robust 7.5mm diameter provides high holding strength

Cons

  • Requires pre-drilling before screw insertion
  • Requires a T30 Torx screwdriver bit not included in the pack
  • Specific 112mm length may not suit all frame thicknesses

Setup, Compatibility & Care

To achieve the best results, ensure the drill hole diameter is matched to the substrate requirements for a 7.5mm screw. For concrete, a 6.0mm masonry drill bit is typically required, though always verify with your specific substrate density. Use a power drill with a T30 Torx bit at a moderate speed to prevent stripping the screw head. Because these screws are made of steel, store them in a dry environment to prevent corrosion. For installations near coastal areas or in high-moisture environments, ensure that the surrounding seal is adequate to protect the screw head from direct water exposure.

Similar items

Price History

DatePrice
Visit shop