Berger Walls & Ceilings Matt Emulsion Paint - Beige

Ensure the surface is clean, dry, and free from loose paint, dust, and grease. Fill any holes or cracks and sand smooth.

Typically, two coats are recommended for optimal coverage and finish.

While suitable for most interior spaces, consider a paint specifically designed for high-moisture environments like bathrooms for increased durability.

Clean brushes and rollers immediately after use with water.

If priming is needed, use a primer suitable for the surface you are painting, following the manufacturer's instructions.

Drying times can vary, but generally, allow for 2-4 hours between coats. Refer to the paint tin for specific instructions.

While primarily designed for walls and ceilings, it can be used on wood, but ensure the surface is properly prepared and consider using a suitable primer.

Coverage rates vary based on the surface, but typically, a 10L tin covers approximately 80 square meters. Refer to the product label for more specific details.

Ensure the paint is thoroughly stirred before application. Apply an even coat and avoid over-brushing or over-rolling. Applying a second coat might be needed.

Ensure the surface is properly prepared. Apply a second coat to achieve optimal coverage, especially on darker or textured surfaces.

Allow the paint to fully dry, as the colour may change slightly. Check the paint tin label to confirm the correct colour.