Craig & Rose 1829 Chalky Emulsion - Fresh Plaster - 2.5L

This emulsion is designed for general interior walls and ceilings. It is not specifically moisture-resistant, so it is best reserved for low-humidity areas like living rooms or bedrooms.

While coverage depends on surface porosity, 2.5L of emulsion paint typically covers approximately 25 to 30 square meters with a single coat.

A primer is highly recommended if you are painting over dark colors, bare plaster, or highly porous surfaces to ensure consistent color and adhesion.

Because this is a water-based emulsion, you can clean brushes and rollers using warm, soapy water immediately after use.

Yes, but due to the matt finish, touch-ups may be slightly visible depending on the lighting and the amount of time that has passed since the original application.

Ensure you are using a good quality medium-pile roller and avoid overworking the paint as it begins to set.

Confirm that the surface was properly cleaned and degreased before application. If the surface is highly porous, a primer or mist coat is required.

While this product is low VOC, ensure the room is well-ventilated during and after painting to allow moisture and any remaining odors to dissipate.