Freefoam Ogee Fascia Joiner - White

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two plasti...

Best current price£3.74from Professional Building Supplies

All Offers

2 offers from £3.74

View price history by clicking the chart icon.

Professional Building SuppliesFreefoam White Ogee Fascia Joiner - 300Mm
Free delivery in 1–3 days
£3.74
Visit shop
PVC Cladding UKFreefoam White Ogee Fascia Joiner - 300Mm
Free delivery in 1–3 days
£3.74
Visit shop

Product Information

Full details

The Freefoam Ogee Fascia Joiner is designed for professional contractors and DIY enthusiasts installing PVC roofline systems who need a clean, finished look while maintaining structural integrity. Its primary benefit is providing a seamless aesthetic transition between two fascia boards while accommodating necessary thermal expansion; however, users must strictly follow the hybrid gluing and silicone sealing method to ensure the joint functions correctly as the temperature changes.

All features

ColourWhite
SeriesOgee
Model Part NumberFOJ
BrandFreefoam

Extended Product Information

FAQs

Can I use this with square-edge fascia boards?

No, this joiner is specifically profiled for the Ogee (curved) fascia range. It will not fit correctly on square-edge boards.

Why do I need to leave a 10mm gap?

PVC expands and contracts with temperature changes. A 10mm gap prevents the boards from warping or buckling due to heat.

What type of sealant should I use?

You must use a low-modulus silicone sealant, which is designed to be flexible and accommodate the movement of the boards.

Can I paint these joiners?

These are designed to match standard white PVC fascia systems and are generally not intended to be painted.

How do I cut the joiner to size?

A standard hacksaw or a fine-toothed wood saw will provide a clean cut through the PVC material.

Troubleshooting

Joiner does not sit flush against the fascia

Check that the fascia boards are perfectly aligned and ensure no debris is trapped behind the joiner clips.

Joiner cracked after installation

This often occurs if both sides were glued; ensure one side is always sealed with low-modulus silicone to allow for thermal movement.

Pros and Cons

Pros

  • Seamlessly masks expansion gaps
  • Matches Ogee profile aesthetics
  • Easy to cut and install on-site
  • Weather-resistant material
  • Essential for thermal movement compliance

Cons

  • Requires specific glue/silicone application technique
  • Profile specific (Ogee only)
  • Limited color options

Setup, Compatibility & Care

To install, first ensure the fascia boards are properly fixed at the correct 10mm interval. Measure the height of your Ogee board and trim the joiner using a fine-toothed saw if necessary for a custom fit. Clean both the joiner and the board surfaces to remove dust and debris to ensure proper sealant adhesion. For care, keep the joiner clean by wiping it down with a mild soap solution and a soft cloth; avoid using abrasive chemicals or solvents that could damage the PVC surface finish.

Similar items

Price History

DatePrice
Visit shop