Axiom Pull Up Tower Socket - 3 Sockets & 2 x USB

The Axiom pull-up tower socket adds a smart and practical final touch to a kitchen island unit. Th...

Best current price£43.95from Rackhams

All Offers

2 offers from £43.95 - £47.49

View price history by clicking the chart icon.

RackhamsAxiom Silver Pop-Up Tower Socket 3 Gang With 2 Usb Sockets - Finish - Box
Free delivery in 1–3 days
£43.95
Visit shop
OnBuy.comAxiom Pull Up Tower Socket 3 Sockets & 2 X Usb 5027825193798
Free delivery in 1–3 days
£47.49
Visit shop

Product Information

Full details

The Axiom Pull Up Tower Socket is designed for kitchen island units, offering a discreet and accessible power solution for appliances and device charging. Its key benefit is providing convenient, retractable power access without permanent fixture in your worktop. A potential caveat is the requirement for significant under-counter space for installation. This product features three 13A power sockets and two 1000mA USB ports, retracting neatly into the countertop when not in use.

All features

Model Part NumberPUST3P/USB
BrandAxiom

Extended Product Information

FAQs

What is the maximum load for the 13A sockets?

Each 13A socket is designed to handle standard household appliance loads. Avoid overloading the sockets with multiple high-power devices simultaneously.

Can I use this in a bathroom or wet area?

This product is designed for kitchen countertops and similar dry environments. It is not rated for use in wet areas like bathrooms.

What is the height of the tower when fully extended?

The tower extends approximately 275mm above the worktop surface when fully pulled up.

What is the total length of the socket tower unit?

The overall length of the socket tower, including the part that retracts below the worktop, is 350mm.

How much space do I need under my countertop?

You will need a minimum of 360mm of clear vertical space below the countertop for the unit to retract fully.

Can I install this in a granite or quartz worktop?

Yes, provided you have the correct 80mm holesaw for the material and follow safe cutting practices for stone surfaces.

What is the warranty period for this product?

Please refer to the product packaging or the manufacturer's official documentation for specific warranty information, as it can vary.

Troubleshooting

Unit does not retract or extend smoothly.

Check for any obstructions around the tower or within the mounting hole. Ensure the unit is correctly seated and not binding against the countertop edge. Clean any debris from the mechanism.

No power to sockets or USB ports.

Verify that the unit's plug is securely connected to a working power outlet. Check your home's circuit breaker to ensure the circuit is active. Test the outlet with another device.

USB ports not charging devices.

Ensure the device is compatible with the 1000mA output. Try plugging the USB cable directly into the port, bypassing any adapters. Test the USB port with a different device if possible.

Water ingress near the unit.

Immediately retract the unit and unplug it. Wipe the exterior dry with a soft cloth. Do not use the unit again until fully dry and confirm no internal damage has occurred. Ensure proper sealing during installation to prevent leaks.

Pros and Cons

Pros

  • Provides convenient and accessible power outlets directly on the kitchen island.
  • Retractable design keeps countertops tidy when not in use.
  • Includes both standard power sockets and USB ports for versatile charging.
  • Easy to install with an 80mm holesaw and pre-attached cable.
  • Enhances kitchen functionality without compromising on style.

Cons

  • Requires a minimum of 360mm of free space below the worktop for installation.
  • The 1000mA USB ports may charge devices slower than higher-rated chargers.
  • The tower's extended height (275mm above worktop) might be a consideration in some designs.
  • Requires a hole cut into the countertop, which is a permanent modification.

Setup, Compatibility & Care Instructions

Installation:

  1. Determine Location: Choose a suitable spot on your countertop, ensuring at least 360mm of clear vertical space beneath for the unit to retract.
  2. Cut Hole: Use an 80mm holesaw to create the mounting aperture in the worktop. Ensure the worktop material can support the installation.
  3. Mount Unit: Insert the tower socket into the hole. Secure it according to the manufacturer's specific instructions, typically involving locking mechanisms from underneath.
  4. Connect Power: Plug the integrated 1.5m cable into a suitable, accessible power outlet.

Compatibility:

  • Compatible with standard 13A appliances.
  • USB ports are suitable for charging most smartphones and tablets, though charging speed may vary.
  • Requires an 80mm diameter hole for installation.
  • Requires a minimum of 360mm clearance below the worktop.

Care:

  • Wipe the top plate and the extended tower with a soft, damp cloth. Avoid abrasive cleaners or solvents.
  • Ensure the unit is fully retracted before cleaning the surrounding countertop.
  • Periodically check the power cable for any signs of damage.

Price History

DatePrice
Visit shop