Cables Direct audio cable - 2m - Black

'M/M' stands for Male-to-Male, indicating that both connectors on the cable are male 3.5mm plugs, designed to be inserted into corresponding female jacks on devices.

Right-angled connectors are ideal for situations where space is limited. They allow you to connect devices in tight spots, like behind furniture or in car consoles, without causing the cable to bend sharply, which can damage the cable or the port.

Gold flashing on connectors provides superior conductivity and corrosion resistance. This ensures a cleaner, more reliable signal transmission and extends the life of the connector.

No, this cable is specifically designed for analog audio signal transmission only. It cannot be used for transferring data between devices.

The 2-meter length is often sufficient for connecting devices to car stereos, especially when the aux port is in the center console or dashboard. However, always measure your specific setup to ensure it meets your needs.

Gently wipe the gold-flashed connectors with a clean, dry, soft cloth. Avoid using any liquids or abrasive materials, as this could damage the plating or impede conductivity.

A straight connector cable has plugs that extend directly out from the device. A right-angled connector cable has plugs that turn 90 degrees, making it better suited for installations where space behind the device is minimal or where you want to avoid sharp cable bends.

Ensure both connectors are fully inserted into the correct ports. Check that the audio source is playing and the volume is turned up. Test the cable with different devices to rule out a faulty connection.

Check the cable for visible damage or kinks. Ensure the connectors are clean and free of debris. Try wiggling the connectors slightly to see if the issue is with the connection point.

This often indicates a problem with the cable's internal wiring or a faulty connector. Test with another known working cable to confirm. If the issue persists with this cable, it may need replacement.