Liberon Shellac Filler Sticks - Light - 3 Pack

Gently heat the stick to soften it, then press the melted filler into the imperfection. Allow it to harden, then sand smooth.

Yes, the three light color tones included are designed to be intermixed to achieve a custom shade that best matches your wood.

The filler is compatible with most standard wood finishes, including French polish, lacquer, and varnish.

A soldering iron with a specialized tip or a heat gun on a low setting from a distance are recommended. Avoid direct flame.

The filler typically hardens within a few minutes after application and cooling. Ensure it is completely hard before sanding.

These filler sticks are best suited for small holes, cracks, and surface imperfections. For deeper damage, multiple applications or a different type of filler may be necessary.

Store the filler sticks in a cool, dry place away from direct sunlight and heat sources to maintain their integrity.

Ensure you are using an appropriate heat source and applying sufficient heat. Test on a scrap piece first. Avoid overheating, which can degrade the product.

The filler may not have been allowed to cool and harden completely. Ensure adequate drying time before attempting to sand or finish. Ensure your heat source is not too hot.

Experiment with mixing the provided light shades to create a closer match. For significant discrepancies, consider a different shade or a more advanced coloring technique.

Ensure the filler is fully hardened. Use progressively finer grit sandpaper to achieve a smooth finish. If the filler is too hard, you may need to use a more aggressive initial sanding grit.