Minotaur Masonry Drill Bit - 7 x 150mm
Best current price£1.54from Travis Perkins
Best offers
Shopping.co.uk recommended and popular offers
Travis Perkins£1.54Visit shop Minotaur Masonry Drill Bit 7 x 150mm
Visit shopTravis Perkins£1.54Visit shop One Offer
1 offer from £1.54
View price history by clicking the chart icon.
Product Information
Full details
The Minotaur 7mm x 150mm masonry drill bit is an essential tool for contractors and DIY enthusiasts who need a reliable, durable solution for drilling into brick, masonry blocks, and light concrete. Its standout feature is the precision tungsten carbide tip, which ensures clean entry points and long-lasting sharpness for anchor fixing projects; however, users should note that it is designed for rotary percussion use and is not intended for heavy-duty reinforced concrete or structural steel.
All features
| Model Part Number | 204280 |
|---|---|
| Brand | Minotaur |
Extended Product Information
FAQs
Can I use this for wood?
No, this is specifically designed for masonry and concrete. It will likely damage or burn wood rather than drilling it cleanly.
Does this work with my standard cordless drill?
Yes, as long as your drill has a standard three-jaw chuck and a hammer/percussion setting.
Is this bit impact driver compatible?
No, this bit uses a round shank meant for chucked drills, not the hex-shank drive found on most impact drivers.
Will this drill through reinforced concrete?
No, this bit is designed for brick, block, and light concrete. It will fail if it hits metal rebar.
How do I know when the bit is worn out?
If the tip appears rounded, chipped, or if drilling takes significantly longer than when the bit was new, it is time to replace it.
Troubleshooting
Bit is getting hot and smoking
Reduce pressure on the drill and pull the bit out frequently to clear dust from the hole.
Bit is slipping in the chuck
Ensure the three-jaw chuck is tightened evenly and the shank is fully seated.
Hole is too large for the anchor
Ensure you are using the correct drill setting; excessive 'wobble' in a loose chuck can cause oversized holes.
Pros and Cons
Pros
- High-quality tungsten carbide tip for extended bit life
- Versatile straight shank fits most standard drill chucks
- Designed for clean and precise hole entry
- Reliable performance in brick and block materials
Cons
- Not suitable for reinforced concrete or steel
- Requires constant cooling or pauses to prevent overheating
- Limited to rotary percussion mode
Setup, Compatibility & Care
To use the bit, open your drill's three-jaw chuck, insert the straight shank until it reaches the stop, and tighten firmly. Ensure your drill is set to the 'hammer' or 'percussion' icon before starting. After use, the bit will be hot; always handle with gloves or let it cool down before storage. Clean any dust from the flutes with a wire brush to prevent buildup. Store in a dry environment to prevent surface corrosion, and avoid dropping the bit on hard surfaces, as this can chip or fracture the carbide tip.
Similar items
Minotaur Masonry Drill Bit - 6 x 150mmFrom £2
Minotaur Masonry Drill Bit - 8 x 150mmFrom £2
DeWalt Impact Masonry Drill Bit - 8mm CarbideFrom £6
Bosch CYL-3 Masonry Drill Bit - 6x100mm - CarbideFrom £5
Mexco Diamond Core A Taper Pilot Drill - 10 x 175mmFrom £6
DeWalt Extreme SDS Plus Drill Bit - 5.5 x 110mmFrom £3
DeWalt Extreme Masonry Drill Bit - 10mm x 120mm - DT6685-XJFrom £3
Silverline Cobalt Drill Bit - 8.0mmFrom £13
Bosch Professional SDS Plus Hammer Masonry Drill Bit - 12 x 160mmFrom £4
DeWALT Extreme SDS Plus Drill Bit - 8 x 160mm - Brown - Size Adult Foot UK 8From £4
NGT Rod Holdall - Single Compact Rod Skin - 12ft Rods - 514From £14
DeWalt Multi Material Drill Bit 3.5mm x 113mm - DeWalt-DT6516-QZFrom £3