Minotaur Masonry Drill Bit - 8 x 150mm

Name: Minotaur Masonry Drill Bit - 8 x 150mm
Brand: Minotaur
SKU: swr6xlzese
Price: 1.87 GBP
Availability: InStock

The Minotaur masonry drill bit is a robust and reliable tool designed for drilling into brick, mas...

Best current price£1.87from Travis Perkins

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Travis Perkins£1.87Visit shop

Minotaur Masonry Drill Bit 8 x 150mm

Visit shop

One Offer

1 offer from £1.87

View price history by clicking the chart icon.

Travis PerkinsMinotaur Masonry Drill Bit 8 x 150mm

£20.00 delivery

£1.87

Visit shop

Product Information

Full details

The Minotaur 8mm x 150mm Masonry Drill Bit is designed for DIY enthusiasts and trade professionals who need a dependable, cost-effective tool for drilling into brick, masonry blocks, and light concrete. Its primary benefit is the durable tungsten carbide tip which ensures consistent, smooth penetration through tough building materials; however, users should note that it is not intended for drilling through reinforced steel or high-density, hardened concrete.

All features

Model Part Number	131-01252
Brand	Minotaur

Extended Product Information

FAQs

Can I use this bit in a standard cordless drill?

Yes, it is compatible with standard three-jaw chucks, but it will work best if your drill has a hammer or percussion setting.

Is this bit suitable for drilling into granite?

No, this bit is designed for brick, masonry blocks, and light concrete. Natural stone like granite requires a professional-grade diamond bit.

Does this drill bit need water cooling?

Masonry bits generally do not require water. Drilling dry while frequently clearing dust from the hole is the recommended method.

How deep can I drill with this bit?

The bit is 150mm long, which allows for a maximum depth of approximately 100-120mm, accounting for the length required to secure it in the chuck.

Why is the bit wandering when I start drilling?

Masonry can be uneven. Use a center punch or a nail to create a small pilot indentation to help the drill bit start in the desired spot.

Troubleshooting

Drill bit is slipping in the chuck

Ensure the shank is fully inserted into the chuck and tighten the jaws firmly. If using a keyed chuck, tighten from all three points.

Bit is getting very hot and smoking

Reduce the drilling speed and apply less forward pressure. Pause frequently to clear masonry dust from the hole.

Hole is not progressing

Verify that your drill is set to the 'hammer' mode. If it is, the bit may have struck a piece of hard aggregate; try moving the hole slightly.

Pros and Cons

Pros

Durable tungsten carbide tip maintains sharpness
Universal shank fits most standard drill chucks
Cost-effective tool for home and professional use
Optimal length for standard anchor installations

Cons

Not suitable for reinforced concrete or steel
Limited effectiveness in high-density aggregate
Requires proper hammer action for best results

Setup, Compatibility & Care

To ensure the longevity of your Minotaur drill bit, verify that your drill is set to the 'hammer' or 'percussion' mode, as rotary-only drilling is ineffective for hard masonry. Ensure the bit is seated deeply and centered in your drill chuck before tightening.

Care Instructions:

Avoid Overheating: Drill in short bursts rather than continuous long durations to preserve the carbide tip.
Clean After Use: Remove concrete dust from the flutes with a brush.
Store Dry: Keep the bit in a dry toolbox to prevent surface oxidation on the shank.
Inspection: Check the tip for chips before every use to ensure safety and precision.