Wavin OsmaSoil - 110mm - Grey - Short Bossed Pipe
Best current price£15.85from Travis Perkins
Best offers
Shopping.co.uk recommended and popular offers
Travis Perkins£15.85Visit shop Wavin OsmaSoil D/SW short bossed pipe 110mm grey
Visit shopTravis Perkins£15.85Visit shop One Offer
1 offer from £15.85
View price history by clicking the chart icon.
Product Information
Full details
The Wavin OsmaSoil 110mm Grey Short Bossed Pipe is designed for efficient and reliable sanitary waste removal in residential and commercial buildings. Its key benefit lies in its durable PVC-U construction and versatile connection options, ensuring a long-lasting and low-maintenance drainage solution. A potential consideration is the need for specific solvent or push-fit techniques for assembly, requiring attention to detail during installation.
All features
| Model Part Number | 4S588G |
|---|---|
| Brand | Wavin |
Extended Product Information
FAQs
What is the primary use of the Wavin OsmaSoil 110mm pipe?
The Wavin OsmaSoil 110mm pipe is designed for sanitary waste removal in both domestic and commercial buildings.
What types of jointing are available for this system?
This system offers convenient push-fit or solvent jointing assembly.
What standards does the Wavin OsmaSoil system meet?
It is Kitemarked to BS EN 1329-1:2000, ensuring quality and reliability.
How do I connect smaller diameter pipes to this system?
The pipe features three closed 40mm spigot tail positions for direct connection of 40mm solvent weld sockets, allowing for adaptable connections.
Can this pipe be used outdoors?
While PVC-U is durable, long-term direct UV exposure can degrade the material. Protection may be necessary for exposed outdoor installations.
What is the advantage of the bossed socket positions?
The three closed boss socket positions allow for adaptable connections, enabling you to branch off other waste pipes or create specific configurations as needed.
Is this product available in other colors?
The Wavin OsmaSoil system is available in various colours and sizes; this specific variant is grey.
Troubleshooting
Leak at joint
Ensure the joint was made correctly using the appropriate method (push-fit or solvent weld). Re-make the joint, ensuring surfaces are clean and lubricant/cement is applied correctly. For solvent weld, ensure sufficient curing time has passed.
Blockage in the pipe
Attempt to clear the blockage using standard drain clearing methods. Avoid using harsh chemicals that could damage the PVC-U. Regular flushing can help prevent future blockages.
Pipe won't fit into socket
Verify you are using the correct size fittings. Ensure the pipe end and socket are clean and free from debris. For solvent weld, check if the pipe has been inserted correctly and not twisted excessively. For push-fit, ensure adequate lubricant has been applied.
Pros and Cons
Pros
- Durable and long-lasting PVC-U material
- Flexible installation with push-fit or solvent jointing
- Adaptable connections for various plumbing configurations
- Meets high safety and quality standards (Kitemarked)
- Low maintenance requirements once installed
Cons
- Requires specific jointing techniques (solvent or push-fit)
- May require specialized tools for solvent welding
- Limited to specific sizes and connection types as per product variant
Setup, Compatibility & Care
Setup:
- Preparation: Ensure the pipe ends and fittings are clean, dry, and free from damage. For solvent welding, chamfer the spigot ends slightly.
- Jointing (Push-Fit): Apply a thin layer of appropriate lubricant to the spigot end and push it firmly into the socket until it reaches the depth stop.
- Jointing (Solvent Weld): Apply solvent cement evenly to both the spigot and the inside of the socket. Insert the spigot into the socket and twist approximately a quarter turn to ensure even distribution. Hold the joint for 30 seconds to set.
- Alignment: Ensure pipes are properly aligned before making final connections to avoid strain.
Compatibility:
The Wavin OsmaSoil system is designed to connect with other Wavin OsmaSoil fittings and pipes of the same diameter (110mm). It is also compatible with other drainage systems adhering to BS EN 1329-1 standards, though it is recommended to use Wavin accessories for guaranteed performance.
Care:
- Cleaning: Regularly flush the system with water to prevent build-up. Avoid harsh chemicals or abrasive cleaners.
- Inspection: Periodically check joints for any signs of leakage or damage, especially after significant ground movement or heavy use.
- Protection: Protect pipes from physical damage during and after installation. Ensure exposed pipes are shielded from extreme UV exposure if applicable.
Similar items
National Ventilation Extractor Fan Condensation Trap - 100-110mmFrom £12
Malmo Stacking Mugs - Black - 4 PackFrom £10
Wavin OsmaSoil 110mm Ringseal Single Socket Single Branch 87.5 Degree 4S190 GreyFrom £37
FloPlast Ring Seal Soil Boss Pipe - 110mmFrom £13
Barro Cup - Set of 2 - Light BlueFrom £22
Silver Cross Dune Reef Cup HolderFrom £34
Hep2O Keyless Double End Reduced Tee - 15 x 15 x 22mm - KL18-22From £8
FloPlast Waste Pipe Branch - 40mmFrom £2
Amore Set of 2 Mr & Mrs Mugs - Grey WhiteFrom £12
Watering Can - 5L - ProsperplastFrom £8
Le Creuset Sphere Mug - FlintFrom £15
Wavin - 110mm Pipe - 40mm Socket - BlackFrom £13