Shopping.co.uk

Danfoss RAS-C2 Angled Thermostatic Radiator Valve and Lockshield Pack - White

Danfoss RAS-C2 Angled Thermostatic Radiator Valve and Lockshield Pack - White

The Danfoss RAS-C2 Angled Thermostatic Radiator Valve and Lockshield Pack is a high-quality heatin...

Best current price£19.99from eBay

Colour
GreyWhite

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£19.99Visit shop

Danfoss Ras-C2 Angled Thermostatic Radiator Valve & Lockshield 10mm 013G6006 NEW

Visit shop
TrustedAmazon
Amazon£32.99Visit shop

Danfoss White 013G6006 Ras-C2 Combi Trv With Lockshield Valve 10Mm For Two-Pipe Domestic Heating Systems - Flow Selectable, High Accurate Temperature Control - Bi-Directional Valve (White)

Visit shop

All Offers

4 offers from £19.99 - £37.36

View price history by clicking the chart icon.

eBayDanfoss Ras-C2 Angled Thermostatic Radiator Valve & Lockshield 10mm 013G6006 NEW
Free delivery in 1–3 days
£19.99
Visit shop
City Plumbing GBDanfoss Ras-C2 Angled Trv & Lockshield 10Mm 013G6006
Free delivery in 1–3 days
£23.21
Visit shop
AmazonDanfoss White 013G6006 Ras-C2 Combi Trv With Lockshield Valve 10Mm For Two-Pipe Domestic Heating Systems - Flow Selectable, High Accurate Temperature Control - Bi-Directional Valve (White)
Free delivery in 1–3 days
£32.99
Visit shop

Product Information

Full details

This guide is for homeowners seeking to improve their home's heating efficiency and comfort using the Danfoss RAS-C2 Angled Thermostatic Radiator Valve and Lockshield Pack. The primary benefit is individual radiator temperature control, allowing you to tailor heating to each room. However, this product requires some basic plumbing knowledge for installation. This guide will walk you through the features, setup, and troubleshooting of your Danfoss RAS-C2 valve.

All features

ColourWhite
Model Part Number013G6006
BrandDanfoss

Extended Product Information

FAQs

How do I adjust the temperature?

Rotate the numbered dial on the thermostatic valve to set the desired temperature. The temperature range is 8-28°C.

What is the lockshield valve for?

The lockshield valve helps balance your heating system. It ensures that all radiators heat up evenly by controlling the flow of water to each radiator.

Can I install the valve myself?

While the installation is straightforward, it's recommended to have some basic plumbing knowledge. If you're unsure, consult a professional.

What should I do if the radiator is cold?

Check the temperature setting. If the setting is too low, increase the temperature. Bleed the radiator to remove trapped air. Inspect the valve for any blockages or damage.

How do I remove the radiator?

Turn the valve to the positive off position and close the lockshield valve. Ensure the system is cooled down before disconnecting.

What is the frost protection setting?

The frost protection setting automatically keeps the radiator at a low temperature to prevent freezing, even when the system is off.

What maintenance is required?

Wipe the valve with a damp cloth. Check for leaks periodically and bleed the radiator if necessary.

Troubleshooting

Radiator not heating up.

Check the valve's temperature setting. Ensure the valve is not in the off position. Check for airlocks and bleed the radiator if necessary.

Uneven heating across radiators.

Check the lockshield valve settings to ensure proper balancing of the heating system. Consult a professional if necessary.

Leaks at the valve connections.

Tighten the connections. If the leak persists, check the seals and replace if needed. Turn off the heating system immediately.

Pros and Cons

Pros

  • Individual radiator temperature control for increased comfort and energy efficiency.
  • Angled design provides a clean and aesthetically pleasing installation.
  • Lockshield valve included for proper radiator balancing.
  • Bi-directional valve design simplifies installation.
  • Frost protection setting protects against freezing.

Cons

  • Requires some basic plumbing knowledge for installation.
  • May require draining the system during initial setup.
  • The white finish may not match all existing radiator colors.

Setup, Compatibility & Care

Setup

  1. Preparation: Turn off your heating system and allow the radiators to cool down.
  2. Removal of Old Valve: If replacing an existing valve, disconnect the old valve following the manufacturer's instructions. Drain the system if necessary.
  3. Installation: Screw the Danfoss RAS-C2 valve onto the radiator and connect it to the pipework.
  4. Lockshield Valve Balancing: Use the lockshield valve to balance the system, ensuring even heat distribution throughout your home. Consult a professional if you're unsure how to balance the system.
  5. Testing: Turn the heating system back on and check for any leaks. Adjust the thermostat to the desired temperature.

Compatibility

The Danfoss RAS-C2 is suitable for indoor use and compatible with standard radiator systems. Ensure that the valve size (10 mm) matches your radiator's connections.

Care

  • Wipe the valve with a damp cloth to remove any dust or debris.
  • Avoid using harsh chemicals or abrasive cleaners.
  • Check the valve periodically for any signs of leaks or damage.

Similar items

Danfoss Radiator Valve - Angled - WhiteFrom £15Flomasta Polished Angled Radiator Valve - FlomastaFrom £12Drayton RT414 TRV - 15mm Angled with LockshieldFrom £45EPH Controls TRV & Lockshield Pack - White - EMTRV15From £12Flomasta Gloss Chrome Effect Angled Manual Radiator Valve - 15mmFrom £7LavaTap Thermostatic Radiator Valve - Angled - SilverFrom £9Altecnic Ecocal Angled TRV - Twin Pack - 10mmFrom £25Drayton RT212 Thermostatic Radiator Valve - WhiteFrom £16Pegler Terrier 3 TRV Angled 15mm - 631801From £20Pegler Terrier 3 TRV Angled - 8/10mm Brass - 631800From £28Pegler Yorkshire Terrier Thermostatic Radiator Valve - 15mmFrom £30TRV Base - SilverFrom £10

Price History

DatePrice
Visit shop