Atco Liner 18S Li Self-Propelled Rear Roller Cordless Lawn Mower Kit

Insert the fully charged battery into the designated slot on the mower until it clicks securely into place. Refer to your manual for specific instructions.

Lift the grass collector from the mower, and hold it over a waste receptacle. Open the collector flap to empty the clippings.

Locate the cutting height adjustment lever or mechanism on the mower deck. Move the lever or adjust the mechanism to your desired cutting height.

Regularly inspect the blade for sharpness and damage. Sharpen or replace the blade as needed. Consult your manual for instructions.

Store the mower in a dry, protected place, away from direct sunlight and extreme temperatures. Remove the batteries during extended storage.

Refer to the product documentation or contact Atco customer service for specific warranty information.

After each use, remove the grass collector and wipe down the mower deck with a damp cloth. Do not use excessive water or solvents.

Check that the batteries are fully charged and properly installed. Ensure the safety key is engaged. Also, check the power button.

Check the blade for sharpness and damage. Adjust the cutting height to the appropriate level for the grass length. Ensure the grass collector is not full.

The batteries may need to be recharged. Check the battery charge level indicator.

Check that the self-propel lever is engaged properly. Inspect the drive belt (refer to the manual).