Atco Classic 18S Petrol Lawnmower - Self-Propelled - 46cm

Consult your engine's manual for the specific grade and quantity of oil. Typically, SAE 30 or 10W-30 is recommended for Stiga engines, but always verify with the official documentation.

To mulch, insert the provided mulching plug into the rear discharge chute. To collect, remove the mulch plug and attach the grass collector.

While it can cut longer grass, it is most effective on grass that is regularly maintained. For very long or overgrown grass, it's advisable to cut at a higher setting first and then lower it for a second pass.

It's best to clean the mower deck after each use to prevent grass build-up. Regular checks of the air filter and spark plug should be done seasonally or as recommended in the engine manual.

Some assembly is required, primarily attaching the handles and connecting cables. The engine and main body are typically pre-assembled. Refer to the user manual for detailed instructions.

Basic maintenance includes checking and topping up oil, cleaning or replacing the air filter, and checking/cleaning the spark plug. Refer to the engine manual for specific intervals and procedures.

Check fuel level, ensure the spark plug cap is on securely, and verify the choke is in the correct position for starting. Ensure fuel is fresh.

Confirm the drive lever is engaged. Check for any obstructions around the drive belt or rear wheels. Ensure the engine is running at sufficient speed.

Adjust the cutting height, ensure all wheels are at the same height setting, and check if the blade is sharp and securely fitted. Clear any debris from the deck.

Ensure the collector is fitted correctly and not overfilled. Check for blockages in the discharge chute. If mulching, ensure the mulch plug is fully inserted.