Water based and quick drying, suitable for interior and exterior use. No primer or undercoat neede...Water based and quick drying, suitable for interior and exterior use. No primer or undercoat needed. Low VOC's. Use on a variety of surfaces including wood, MDF, metal, plastic, tile, masonry, plaster and uPVC. This paint is suitable for indoor or outdoor use on a wide variety of surfaces. Apply this satin black paint directly to wood, plastic, metal, plastic-coated steel, galvanised steel, aluminium, copper, cladding, brick, masonry, fibreglass, terracotta, stone, plaster, MDF, tiles, melamine, UPVC and much more. With its outstanding flexibility, MSP resists flaking, peeling or cracking. It goes over most other paints and varnishes including weathered tar varnish, bitumen and creosote. This water-based paint is non-yellowing, and cleans up with water. Coverage of up to 12-14m² per litre. Dries in 2-4 hours - recoatable after 4 hours. Easy to apply by brush, roller or spray. Resistant to flaking, peeling and cracking. Supplied in a 750ml tin - total coverage of up to 10.5m².
This guide provides essential information for users of Bedec Multi Surface Paint Satin in Black. Ideal for both DIY enthusiasts and professionals, this paint offers exceptional versatility, allowing application on various surfaces without the need for a primer or undercoat. A key benefit is its quick-drying, water-based formulation, saving time and effort. However, note that achieving optimal results requires proper surface preparation.
All features
Colour
Black
Model Part Number
BEDE2KB0003/29
Brand
Bedec
Extended Product Information
FAQs
How much area will 750ml cover?
The 750ml tin will cover up to 10.5m² total, with a coverage of up to 12-14m² per litre.
Do I need a primer?
No, Bedec Multi Surface Paint Satin can be applied directly to most surfaces without a primer.
How long does it take to dry?
It dries in 2-4 hours and can be recoated after 4 hours.
Can I use it on metal?
Yes, it can be used on metal surfaces. Ensure the metal is clean and free of rust.
Is it suitable for outdoor use?
Yes, it is suitable for both interior and exterior use.
How do I clean my brushes and rollers?
Clean up with water immediately after use.
What surfaces can I use it on?
You can use it on wood, MDF, metal, plastic, tile, masonry, plaster, uPVC, and many other surfaces.
Does this paint yellow over time?
No, this water-based paint is non-yellowing.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean and properly prepared. Lightly sand glossy surfaces and apply a second coat if necessary.
Paint is peeling or flaking.
Make sure the surface is completely dry before applying the paint. Check for any incompatible paints underneath and consider a suitable primer.
Uneven finish.
Ensure paint is stirred well before use. Apply even coats and avoid over-brushing or over-rolling.
Pros and Cons
Pros
Quick-drying, water-based formula.
Suitable for a wide range of surfaces.
No primer or undercoat required, saving time.
Resistant to flaking, peeling, and cracking.
Low VOC, environmentally friendly.
Cons
Requires proper surface preparation for optimal results.
Coverage is up to 12-14m² per litre, so accurate measurement is important.
Setup, Compatibility & Care
Setup
Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, grease, and dirt. Lightly sand glossy surfaces to improve adhesion.
Application: Stir the paint thoroughly before use. Apply using a brush, roller, or spray.
Coats: Apply two coats for optimal coverage and durability. Allow 4 hours between coats.
Coverage: Expect a coverage of up to 12-14m² per litre.
Compatibility
Compatible with most surfaces, including wood, metal, plastic, and uPVC.
Can be applied over most other paints and varnishes.
Care
Clean up with water.
Store in a cool, dry place, away from direct sunlight and extreme temperatures.