Charles Bentley Danube Water Feature - Brown

No, the Charles Bentley Danube Water Feature is mains powered and requires a standard electrical outlet to operate. It comes with a 3-pin plug and a 5m cable.

Yes, some self-assembly is required. Please refer to the included instructions for guidance on putting the tiers together.

The feature is weatherproof and frost-resistant. However, for maximum longevity and to prevent potential damage from extreme freezing, it is recommended to empty it and store it in a frost-free location during winter.

The dimensions are Height: 54.5cm, Width: 26.5cm, and Depth: 26.5cm.

Regularly top up the water level. To clean, use a soft cloth and mild soapy water, avoiding abrasive cleaners. Periodically check for and remove any debris from the pump and reservoir.

It uses a 12v pump, which is mains powered.

Yes, its compact size (26.5cm x 26.5cm footprint) makes it well-suited for balconies, patios, and other smaller outdoor spaces.

Ensure the unit is properly plugged into a working mains socket. Check that the pump is fully submerged in water. Verify that the power cable is securely connected.

Check the water level in the reservoir and top up if necessary. Ensure the pump intake is not blocked by debris. Clean the pump filters if applicable.

Confirm the unit is powered on. Check the LED light connections within the feature (if accessible during assembly or cleaning). Ensure the power supply is adequate.

Adjust the water flow rate from the pump if possible, or check that the water is cascading evenly down each tier. Ensure the feature is on a perfectly level surface.