Timco Waterbars Galvanised - 28mm X 1M X 4mm

The Timco Waterbars are made from carbon steel.

The galvanised finish provides a high level of corrosion resistance.

They are suitable for occasionally damp/wet, rural, and sheltered areas.

Use a metal-cutting saw to cut the waterbar to the required length.

Appropriate fixings such as screws or nails (not included) can be used.

Clean the waterbar periodically with a mild detergent and water.

The thickness is 4mm.

Make sure you measure accurately. If you need a longer bar you may need to order a different size. You can also seal the joint with sealant.

Check the waterbar for correct installation, ensuring it is flush and properly sealed with sealant. Inspect for any gaps or damage and repair or replace as needed.

Clean the corroded area with a wire brush and apply a suitable anti-corrosion treatment if the damage is minor. Replace the waterbar if the corrosion is severe.