Dulux Problem Walls White Multi-Surface Basecoat, 2.5L

It is suitable for damp, porous, and uneven walls. It can also be used on various surfaces like plaster, concrete, and previously painted walls.

Follow the manufacturer's instructions, but generally allow 2-4 hours between coats. Ensure each coat is fully dry before applying the next one.

It is compatible with most water-based and oil-based topcoats. Always check the topcoat manufacturer's instructions for specific compatibility recommendations.

The surface should be clean, dry, and free from loose particles. Remove any flaking paint, fill holes or cracks, and sand any uneven areas.

Store in a tightly sealed container in a cool, dry place away from direct sunlight.

You can use a brush, roller, or spray, depending on the size and texture of the surface.

Ensure the surface was properly prepared (cleaned and sanded). Apply another coat of basecoat if needed.

Ensure the room is well-ventilated. Apply in thin, even coats and avoid applying too much product at once.

Make sure the basecoat is completely dry before applying the topcoat. Use quality painting tools and apply the topcoat evenly.