Rackhams Cosmic Marble Wallpaper - Beige

While the vinyl material is durable and washable, it is not specifically classified as moisture-resistant for high-humidity areas like steam-filled bathrooms. It is best used in bedrooms, living rooms, or hallways.

You will need a paste brush or roller, a sharp utility knife, a plumb line or spirit level, a wallpaper smoother, and a seam roller.

Measure the total width of your walls and divide by 0.53m to find the number of drops required. Multiply by your wall height to determine the total length, then divide by 10.05m per roll, adding 10-15% for waste.

This wallpaper is designed with a specific aesthetic finish. Painting over the shimmering marble effect will cover the intended design, so it is not recommended.

No, the adhesive is not included. You will need to purchase a standard wallpaper paste suitable for vinyl wallcoverings.

The wallpaper is strippable. Simply lift a corner of the paper at the seam and pull it away from the wall. In most cases, it should come off in full strips.

Ensure that the wall is properly primed and that the adhesive is applied evenly to the edge of the seams. Gently use a wallpaper seam roller for a tighter fit.

Use a sharp pin to gently prick the bubble and release the trapped air, then press the paper down flat using a clean cloth or wallpaper smoother.

Check the roll label for the pattern repeat measurement and ensure that each strip is cut with sufficient allowance for alignment before applying adhesive.