Motip Primer Aerosol - Grey - 500ml
Best current price£4.49from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£4.49Visit shop Primer Grey 500ml
Visit shopeBay£4.49Visit shop All Offers
6 offers from £4.49 - £13.96
View price history by clicking the chart icon.
Motip M04054 Grey Primer 500mlFree delivery in 1–3 days£11.49Visit shop →
Motip M04054 Grey Primer 500mlFree delivery in 1–3 days£11.49Visit shop →
Fits MOTIP CHEMIA SAMOCHODOWA 4054 GREY CASE ⭐UK Stock⭐Free delivery in 1–3 days£12.94Visit shop →
Fits MOTIP CHEMIA SAMOCHODOWA 4054 GREY CASEFree delivery in 1–3 days£13.96Visit shop →
Product Information
Full details
This guide is designed for DIY enthusiasts and professionals seeking to achieve a flawless finish on various surfaces. The Motip Grey Primer Aerosol provides excellent coverage, adhesion, and rust prevention, making it ideal for preparing surfaces of wood, metal, glass, and stone for painting. However, ensure proper ventilation when applying, as it is a spray product.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 04054 |
| Brand | Motip |
Extended Product Information
FAQs
What surfaces can I use this primer on?
This primer is suitable for wood, metal, glass, stone, concrete, and plastic.
How many coats should I apply?
Apply 2-3 thin coats for optimal results, allowing a few minutes of drying time between each coat.
How long does it take to dry?
The primer is fast-drying, but drying time can vary. Allow at least 15-30 minutes between coats and a few hours before sanding or applying the topcoat.
Can I use this primer outdoors?
Yes, this primer is suitable for both indoor and outdoor use.
How do I clean the nozzle if it clogs?
Wipe the nozzle clean with a solvent-soaked cloth or invert the can and spray for a few seconds after use to prevent clogging.
What is the best way to prepare the surface?
Clean the surface, remove rust or loose paint. Light sanding with grain 400 is often recommended to improve adhesion.
What kind of paint can I use on top of this primer?
You can use any lacquer system or paint compatible with the surface you're painting.
Is this primer rust-resistant?
Yes, this primer is rust-preventative.
Troubleshooting
Primer is running or sagging.
Apply thinner coats, keeping the can at the recommended distance from the surface. Ensure you are not applying too much primer at once.
Primer is not adhering properly.
Ensure the surface is clean, dry, and properly prepared. Sand the surface lightly to improve adhesion. In extreme cases, a different primer may be required.
Nozzle is clogged.
Wipe the nozzle clean with a solvent-soaked cloth. Invert the can and spray for a few seconds to clear the nozzle after use.
Pros and Cons
Pros
- Fast drying time saves time on projects.
- Provides excellent coverage and filling properties.
- Offers rust prevention for metal surfaces.
- Easy to sand for a smooth finish.
- Suitable for use on a variety of materials.
- Compatible with various paint systems
Cons
- Requires proper ventilation due to aerosol application.
- The 500ml can may not be sufficient for large projects.
- May require multiple coats for optimal results.
- Sanding is required before applying the topcoat.
Setup, Compatibility & Care
- Preparation: Clean the surface thoroughly, removing any rust, grease, or loose paint. Lightly sand the surface if necessary to improve adhesion.
- Application: Shake the can vigorously for at least two minutes before use. Hold the can approximately 25-30 cm from the surface and apply even coats, allowing a few minutes of drying time between each coat. Multiple thin coats are better than one thick coat.
- Drying: Allow the primer to dry completely before sanding (if required) or applying the topcoat. Drying time can vary depending on temperature and humidity, but it is fast drying.
- Compatibility: This primer is compatible with all lacquer systems, meaning you can use it with a wide range of paints.
- Care: Store the can in a cool, dry place away from direct sunlight and heat sources. After use, invert the can and spray for a few seconds to clear the nozzle.