Regatta Octagon II Printable 3 Layer Jacket - Black - XXXXXL

The Regatta Octagon II has a waterproof and windproof finish, making it highly resistant to rain and wind. However, it utilizes a breathable membrane and is designed more for 'weatherproof' capabilities rather than prolonged immersion in heavy downpours. For extreme conditions, a dedicated waterproof shell might be more suitable.

The jacket should be washed according to the care instructions: machine wash cold (30°C) on a gentle cycle with mild detergent. Avoid fabric softener. Do not iron directly on the printed area. Drying should be done on a low heat setting or air-dried. Harsh cleaning methods can damage the print.

The jacket provides good wind resistance and is suitable for cool temperatures, especially when layered. For very cold conditions, consider wearing insulating layers (like fleece or a down vest) underneath the jacket.

A three-layer membrane system typically involves an outer fabric, a waterproof/breathable membrane bonded to it, and an inner protective lining. This construction offers durability, weather protection, and comfort by managing moisture vapor from the inside while keeping external water out.

The natural stretch fabric allows for greater freedom of movement, making the jacket comfortable to wear during physical activities like hiking, climbing, or even just bending and reaching. It prevents the fabric from feeling restrictive.

If water stops beading up on the surface and instead soaks into the outer fabric (causing the jacket to feel wet and reducing breathability), it's time to reproof. This usually happens after several washes or extensive wear.

This specific guide is for the XXXXXL size in Black. The Octagon II jacket is available in a range of sizes and colours, check the product listing for other options.

This is likely due to insufficient breathability. Ensure the jacket is clean, as dirt and oils can clog the membrane pores. Wash with a mild detergent and consider re-applying a water-repellent finish.

The water-repellent finish may have worn off. Reapply a suitable reproofing treatment designed for technical outerwear. Ensure the jacket is clean before treatment.

Clean the zipper teeth with a damp cloth and gently lubricate with beeswax or a silicone-based lubricant. Avoid forcing the zipper.

Avoid high heat during washing and drying. Do not iron directly on the print. If peeling is minor, it may be possible to carefully re-adhere with a low-heat iron and protective cloth, but significant damage may be irreparable.