Sadolin Extra Durable Clearcoat Gloss - Yellow

Clean the wood surface thoroughly to remove any dirt, dust, or old coatings. Lightly sand the wood to create a smooth surface, and then wipe clean before applying the clearcoat.

The number of coats depends on the wood type and the desired level of protection. Generally, two to three coats are recommended, following the manufacturer's instructions.

No. The existing paint or varnish must be completely removed before applying Sadolin Extra Clearcoat.

Drying times vary depending on the temperature and humidity. Refer to the product label for specific drying times, usually between 4-8 hours for each coat.

Yes, it is suitable for most types of exterior wood.

Clean the treated surfaces with mild soapy water and a soft cloth or sponge. Avoid abrasive cleaners.

It provides protection against the sun through its active UV filters.

Ensure proper surface preparation before application. Remove loose coating and reapply.

Apply the product evenly, avoid over application and ensure the product is stirred thoroughly before use. Apply multiple thin coats, rather than one thick coat.