Roxil PC Coloured Preserver is a ready-for-use colour stain that protects new wood or restores tir...Roxil PC Coloured Preserver is a ready-for-use colour stain that protects new wood or restores tired, dull timber with a choice of UV-resistant, fade-free colours. Its biocidal properties and colour-fast protection last for up to 5 years, deterring fungal growth and keeping wood decay at bay. This fast-drying, dual-purpose wood stain and preserver is suitable for indoor and outdoor use. It prevents wood deterioration and revitalizes the wood with a colour-fast, deeply penetrating treatment that enhances the natural wood grain with a satin finish. The water-based, low odour formulation has zero VOCs, making it easy to clean and non-flammable. It can be used on hard and soft woods as a primer or finishing coat, and applied to surfaces such as doors, sheds, window frames, fences, and furniture by spray or brush. A 1-litre pack covers 5 m². It is touch dry in 30 minutes and can be overcoated after 60 minutes.
Roxil Cobalt Blue Wood Stain Preserver (, 1 Litre Spray) - Fast-Drying Satin Finish For Decking, Fence, Shed, Furniture. Up To 5 Year Protection For Indoor & OutdoorFree delivery in 1–3 days£19.99Visit shop →
Roxil Cobalt Blue Wood Stain Preserver 5 Litre (Cobalt Blue) Fast-Drying Satin Finish For Decking, Fence, Shed, Furniture. Up To 5 Year Protection For Indoor & OutdoorFree delivery in 1–3 days£34.99Visit shop →
B&QB&Q - Wood Stain Preserver (1L Spray Cobalt Blue) 5 Year Protection Indoor & Outdoor No VocsFast-Drying.
OnBuy.comRoxil Wood Stain Preserver (Cobalt Blue, 1L Spray) For Decking, Fence, Shed, Furniture. Up To 5 Year Protection For Indoor & Outdoor 5060132766675
This guide is for anyone looking to protect and revitalize their wood surfaces with Roxil PC Coloured Preserver in Blue. It offers long-lasting, fade-resistant colour and protection against fungal growth and wood decay. While it's easy to apply and fast-drying, achieving the best results requires proper surface preparation.
All features
Colour
Blue
Brand
Roxil
Extended Product Information
FAQs
How long does the Roxil Wood Stain Preserver last?
The colour and protection last for up to 5 years.
Can I use this product on previously treated wood?
It is recommended to remove any existing coatings before applying Roxil Wood Stain Preserver for optimal results.
How many coats are needed?
For optimal protection and colour intensity, two coats are recommended. Always follow the manufacturer's instructions.
What is the coverage rate?
A 1-litre pack covers approximately 5 m².
Is this product suitable for use on decking?
Yes, it can be used on decking, but ensure the surface is properly prepared and apply a non-slip finish if needed.
What is the drying time?
It is touch dry in 30 minutes and can be overcoated after 60 minutes.
How do I clean the application tools?
Clean tools with water immediately after use.
Does this product have a strong odour?
No, it has a low odour and zero VOCs.
Troubleshooting
Uneven colour application
Ensure even application, avoid overloading the brush or spray. Apply thin, even coats, and allow each coat to dry fully before applying the next.
Stain not adhering properly
Ensure the surface is clean, dry, and properly prepared. Sand the surface lightly to improve adhesion. Ensure the product has been properly shaken or mixed before use.
Slow drying time
Ensure adequate ventilation and avoid applying in damp or cold conditions. Check the product expiry date. Ensure application of a thin coat.
Fading of colour
Ensure the product is applied evenly. Reapply the stain every 5 years for maximum UV protection. Ensure the correct product is used for the wood type.
Pros and Cons
Pros
Long-lasting colour and protection.
Easy to apply with brush or spray.
Suitable for both indoor and outdoor use.
Offers protection against fungal growth.
Fast drying time.
Low odour and VOCs.
Cons
Requires proper surface preparation for optimal results.
Colour may vary slightly depending on wood type.
Coverage is approximately 5 m² per litre.
May require multiple coats for desired colour intensity.
Setup, Compatibility & Care
Surface Preparation: Ensure the wood surface is clean, dry, and free from any existing coatings, dirt, or mildew. Lightly sand the surface to improve adhesion.
Application: Apply the Roxil Wood Stain Preserver using a brush or spray. Apply evenly, following the wood grain.
Drying Time: The product is touch dry in approximately 30 minutes. Allow 60 minutes before overcoating.
Compatibility: Suitable for use on both hard and soft woods. Test on a small, inconspicuous area first to ensure compatibility and desired colour.
Care: Clean tools with water immediately after use. Regular cleaning with mild soap and water can help maintain the finish. Reapply every 5 years or as needed to maintain protection.