Karrimor Urban Waterproof Jacket - Black

10K waterproof (or 10,000mm) means the fabric can withstand a 10,000mm column of water before it starts to leak, indicating good rain protection. 10K breathable (or 10,000g/m²/24h) means 10,000 grams of water vapor can pass through one square meter of fabric in 24 hours, indicating decent moisture wicking for active use.

The Karrimor Urban Waterproof Jacket is primarily a lightweight shell designed for weather protection (waterproof, windproof, breathable). It does not provide significant insulation. For winter use or colder temperatures, it is recommended to wear insulating mid-layers underneath for warmth.

Yes, the jacket is machine washable. However, it's crucial to follow the care label instructions. Generally, use a mild detergent or a technical outdoor wash, avoid fabric softeners, and wash on a gentle cycle to preserve the fabric's properties.

If water no longer beads on the surface, the Durable Water Repellent (DWR) finish has worn off. You can restore it by cleaning the jacket and then applying a DWR reproofing product, which can be a wash-in treatment or a spray-on application, available at outdoor retailers.

The hood is designed to be foldaway, meaning it can be neatly rolled up and tucked into a pocket or compartment within the collar of the jacket when not in use.

The pockets are 'zipped pockets' and are generally highly water-resistant due to the jacket's overall waterproof construction. However, no pocket on an outdoor jacket can be guaranteed 100% submersible waterproof unless explicitly stated. For electronics, it's always safest to use an additional dry bag inside the pockets during heavy rain.

While highly functional, the Karrimor Urban Waterproof Jacket is designed for urban use and light to moderate outdoor activities. For extreme sports or very harsh, prolonged weather conditions, specialized technical gear with higher performance ratings might be more appropriate. It provides solid protection for general use.

This could indicate a build-up of condensation, often due to insufficient breathability for the activity level. Ensure you are wearing appropriate base layers (not cotton) and adjust ventilation by opening pockets or slightly unzipping the main zipper if conditions allow. Also, check if the DWR coating needs reproofing.

The Durable Water Repellent (DWR) finish on the fabric surface has likely worn off. This is normal with use and washing. You can restore water repellency by cleaning the jacket and then applying a suitable DWR reproofing treatment (wash-in or spray-on) designed for waterproof breathable fabrics.

Ensure no fabric is caught in the zipper teeth. Clean the zipper teeth with a small brush to remove dirt or debris. For stiffness, a silicone-based zipper lubricant can be applied sparingly to the zipper teeth.

The hook and loop tape may have accumulated lint or debris. Clean the hook and loop fasteners with a small brush or pick to restore their grip. If heavily worn, their effectiveness may be reduced over time.

While windproof, consistent exposure to harsh elements without proper cleaning and care can affect the fabric. Ensure the jacket is clean and consider if any physical damage has occurred. Ensure all zippers and cuffs are fully secured when in windy conditions.