Regatta Calderdale III Waterproof Jacket - Blue - 9-10 Years

Isotex 10000 refers to the fabric's performance ratings: it can withstand 10,000mm of water pressure over a 24-hour period before water begins to seep through (waterproofness), and it allows 10,000 grams of moisture vapor to pass through one square meter of fabric in 24 hours (breathability).

The Calderdale III is a shell jacket designed for waterproof and breathable protection, not for insulation. For winter use or colder temperatures, it is recommended to layer it over appropriate insulating mid-layers, such as a fleece or puffer jacket, for added warmth.

Machine wash the jacket at 30°C on a gentle cycle, preferably with a technical wash liquid specifically designed for waterproof clothing. Avoid using conventional detergents or fabric softeners, as these can compromise the waterproof and breathable properties. Air dry the jacket away from direct heat.

It is generally not recommended to tumble dry this jacket as high heat can damage the waterproof coating and taped seams. If a tumble dry is absolutely necessary to reactivate the DWR, use a very low heat setting for a short duration, but air drying is always preferred.

This particular model of the Regatta Calderdale III jacket is suitable for ages 7+. Specific sizes are available for different age groups, so always check the size chart to ensure a correct fit for your child.

DWR stands for Durable Water Repellent. It's a coating applied to the fabric's outer surface that causes water to bead up and roll off, preventing the fabric from absorbing water and becoming saturated. This helps maintain the jacket's breathability and keeps you drier, as a 'wetted out' outer fabric can reduce breathability.

The jacket features a 'grown on' technical hood with elastication, which provides a close fit to protect against elements. While it is not fully adjustable with drawcords, the elastication helps it stay in place during activity.

Wash the jacket using a technical cleaner designed for waterproof outerwear to remove dirt and residue that can impair DWR. After washing, reactivate the Durable Water Repellent (DWR) finish. This can sometimes be done by gently tumble drying on a low heat setting or by applying a DWR re-proofing spray, following the product instructions.

This often indicates a breathability issue, possibly due to layering or the jacket's vents being obstructed. Ensure the child is wearing appropriate base layers that wick moisture away from the skin, rather than cotton. Also, verify that the jacket is clean, as dirt and oils can clog the breathable membrane. If possible, adjust the cuffs and hem for better airflow without compromising protection.

First, check for any fabric caught in the zipper teeth and gently pull it free. If the zipper is stiff, apply a zipper lubricant or a small amount of graphite (from a pencil) to the teeth to help it glide more smoothly. Ensure the jacket is laid flat when zipping to prevent tension.