Best current price£4.28from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£4.28Visit shop Timco Pair Of Scotch Tee Hinges - Hot Dipped Galvanised - Timbag Of 1 447558
Visit shop
B&Q£9.18Visit shop B&Q - Scotch Tee Hinges Hot Dipped Galvanised4"
Visit shop14 offers from £4.28 - £26.23
View price history by clicking the chart icon.
The TIMCO Scotch Tee Hinges are essential heavy-duty hardware designed for contractors and homeowners looking to secure shed doors, garden gates, and exterior joinery. They offer superior structural support and long-term durability through a robust hot-dipped galvanised finish, effectively preventing sagging and rust in harsh weather conditions. While these hinges provide excellent strength, they must be paired with a third hinge for gates exceeding 2130mm in height to ensure structural integrity and prevent warping.
| Colour | Grey |
|---|---|
| Model Part Number | 447552 |
| Brand | TIMCO |
These hinges are designed to support a maximum gate weight of 80kg per pair.
Yes, the hot-dipped galvanised finish provides a thick zinc layer that offers excellent rust protection, making them suitable for exposed and humid environments.
Yes, each pair is supplied with 18 countersunk screws sized 5.0 x 30mm for installation.
While 700mm-1050mm is the recommended range for optimal performance, wider gates may experience sagging unless additional support hardware is added.
For gates taller than 2130mm, the extra leverage and weight distribution provided by a third hinge prevent the door frame from warping or twisting under its own weight.
While the galvanised finish is designed to be exposed, you can apply an appropriate metal primer followed by outdoor paint if you wish to change the aesthetic color.
Check if the gate exceeds the 80kg limit or 2130mm height threshold, and consider adding a third hinge.
Apply a small amount of silicone-based lubricant or machine oil to the knuckle and pivot point.
Verify the wood is not rotted and ensure you have pre-drilled a pilot hole slightly smaller than the screw diameter.
Installation requires a standard drill driver and appropriate drill bits for pre-drilling pilot holes into your timber. Start by aligning the hinge on the gate frame, ensuring the knuckle extends beyond the door edge to allow for a full swing. Use the provided 5.0 x 30mm countersunk screws to secure the strap to the door and the butt section to the post. For maintenance, while the hot-dipped galvanised finish is highly resistant to weather, applying a light machine oil to the hinge knuckle once a year will maintain smooth operation and protect the pin from debris build-up. Always verify that your gate height does not exceed 2130mm; if it does, you must purchase an additional hinge to distribute the load effectively.
