Frenchic Boujee Al Fresco - 250ml

It can be used on a wide variety of surfaces including wood, laminate, uPVC, metal, radiators, ceramic tiles (in dry areas), and even concrete floors. It's also suitable for furniture and exterior use.

No, this paint is self-priming and self-sealing, which simplifies the preparation process.

The paint is typically touch dry within 1-2 hours, but a full cure for maximum durability can take up to 21 days.

It is suitable for kitchen cupboards and ceramic wall tiles in areas that do not experience constant moisture. It is not recommended for very wet areas like shower surrounds or bath enclosures.

Clean with a damp cloth and a mild detergent if necessary. Avoid abrasive cleaners or excessive scrubbing.

A 750ml tin covers up to 12.5m² per coat, but two coats are recommended, yielding approximately 6m². A 250ml tin covers approximately 2m² with two coats.

Yes, it is EN71-3 certified, making it safe for use on children's toys and furniture.

Stir the paint thoroughly. If still too thick, add a very small amount of water (e.g., 5-10% for a mist coat) and stir well. Ensure you are not painting in excessively cold conditions.

Ensure you are using a good quality brush or roller and applying thin, even coats. Avoid overworking the paint. Allow adequate drying time between coats.

Ensure the surface was properly cleaned and degreased before application. If painting over a very glossy surface, a light scuff or appropriate primer may be necessary.

This may require a second coat. Ensure the paint has been stirred thoroughly to incorporate all pigment.