Frenchic Trim Paint - Grey

No, Frenchic Trim Paint is formulated as a self-priming and self-sealing paint, meaning you typically only need to apply two coats of the paint itself for a durable, finished look.

Drying times can vary, but generally, the paint is touch-dry within 1-2 hours. Recoating is usually recommended after 2-4 hours, depending on humidity and temperature.

It is suitable for most interior surfaces including woodwork, trims, skirting boards, doors, radiators, metal, and various furniture types (wood, laminate, kitchen cupboards).

Yes, the paint is water-based, low VOC, and low odour. It is also EN71-3 certified, meaning it is safe to use on children's toys and furniture.

Clean your brushes and equipment immediately after use with warm, soapy water. Rinse thoroughly.

A 500ml tin will cover approximately 7m² with a single coat. Two coats are recommended for durability, covering about 3.5m².

This paint is designed for interior use only.

Ensure the surface was properly cleaned and free from grease, dust, or previous finishes that may interfere with adhesion. Lightly sanding glossy surfaces before application can help.

Ensure paint is stirred thoroughly. Apply thin, even coats using a quality brush or roller. Avoid overworking the paint. Allow adequate drying time between coats.

Note that the 'Grey' shade presents differently depending on light and surroundings. Test the colour in your intended space under various lighting conditions before committing to a large project.

Stir the paint thoroughly. If necessary and only if absolutely essential, a *very* small amount of water can be added, but this may compromise the finish. Ensure paint is stored at room temperature.