Davey Narrow Bathroom Pillar Light - Polished brass

This fixture is IP44 rated, making it suitable for use in bathrooms in zones 1 and 2 (areas likely to be affected by splashes or steam). Always consult an electrician for specific zone recommendations based on your bathroom layout.

While a standard on/off switch will operate the light, you will not be able to utilize the dimming feature. For dimming, a compatible LED dimmer switch is required.

This guide specifically refers to the 'Davey Narrow Bathroom Pillar Light - Polished brass' which is available in two sizes: H:40cm x W:10cm or H:60cm x W:10cm. Please refer to the product listing for the exact size you are purchasing.

For the polished brass finish, use a soft cloth lightly dampened with water. If more intensive cleaning is needed, use a specialized brass cleaner, following the product instructions carefully and testing in an inconspicuous area first.

No, the LED light source is integrated into the fixture and is not designed to be user-replaceable. If the LED fails outside of the warranty period, the entire fixture may need to be replaced.

It refers to the design style, characterized by its curved profile and the use of solid glass rods, which evokes the aesthetic popular in the 1920s and 1930s, known for its geometric shapes and luxurious feel.

Ensure the power supply is on and the circuit breaker is not tripped. Verify the wiring connections are secure and correct. Check if the dimmer switch is set to a level above zero.

Check the connection to the dimmer switch and ensure it is compatible with LED fixtures. Loose wiring connections can also cause flickering; consult an electrician to check.

Verify that the dimmer switch is fully compatible with LED and rated for the fixture's wattage. Ensure the dimmer is not set to a low maximum setting.

Gently clean the glass rods with a soft, damp cloth. Ensure the cloth is not overly wet to avoid water marks.