Fascia End Cap - 300mm - Anthracite Grey Smooth

End caps are designed to seal the exposed cellular core of cut fascia boards, providing a neat fin...

Best current price£5.66from Professional Building Supplies

All Offers

2 offers from £5.66

View price history by clicking the chart icon.

Professional Building SuppliesFreefoam Anthracite/Grey Fascia End Cap - 300Mm Smooth
Free delivery in 1–3 days
£5.66
Visit shop
PVC Cladding UKFreefoam Anthracite/Grey Fascia End Cap - 300Mm Smooth
Free delivery in 1–3 days
£5.66
Visit shop

Product Information

Full details

The Freefoam 300mm Anthracite Grey Fascia End Cap is designed for homeowners and contractors looking to professionally seal the exposed cellular core of cut fascia boards. This component provides a clean, finished aesthetic for fascia runs that do not terminate at a corner, effectively protecting the board material from weathering. While the end cap offers a universal length to accommodate various board widths, it requires manual trimming and the use of specialized adhesive for a secure, permanent fit.

All features

Model Part NumberFWDCAG
BrandFreefoam

Extended Product Information

FAQs

Can these end caps be used on white fascia boards?

These caps are finished in Anthracite Grey and are intended to match that specific color profile.

Do I need special tools to install these?

A standard hacksaw for trimming and a high-quality superglue for bonding are the primary requirements.

Are these suitable for corner joints?

No, these are end caps designed for terminating runs. You should use dedicated corner trims for corner junctions.

How long is the end cap?

The end cap is 300mm long and is designed to be trimmed down to fit your specific board depth.

Is the finish UV stable?

Yes, Freefoam components are designed for exterior use and include UV-stabilizing properties in the finish.

Can I use silicone instead of superglue?

The manufacturer recommends using superglue for a secure, permanent bond on this type of end cap.

Troubleshooting

End cap does not sit flush against the board.

Check the edge of the fascia board for debris or an uneven cut; trim the board square if necessary.

Adhesive failing to bond.

Ensure both the end cap and the fascia board are completely clean, dry, and free of dust before applying superglue.

Pros and Cons

Pros

  • Matches standard anthracite grey roofline color schemes
  • Protects exposed cellular cores from water damage and decay
  • Provides a clean, professional finish to fascia runs
  • Universal design fits various board widths

Cons

  • Requires manual trimming with a hacksaw
  • Requires the use of separate superglue for installation
  • Not suitable for corner applications

Setup, Compatibility & Care

To install, first ensure the fascia board is cut squarely to the desired length. Measure the required drop of the fascia board and transfer this measurement onto the 300mm end cap. Use a fine-toothed hacksaw to cut the cap to size, ensuring the edges are smooth to prevent potential damage during installation. Once cut, apply an appropriate superglue to the interior face of the end cap, press it firmly against the exposed end of the fascia board, and hold until the adhesive cures. For maintenance, keep the surface clean by wiping with a soft cloth and mild soapy water to maintain the smooth anthracite finish.

Similar items

Price History

DatePrice
Visit shop