Fascia End Cap - 315mm

Name: Fascia End Cap - 315mm
Brand: Freefoam
SKU: lgem4ejgif
Availability: InStock

End caps are used to seal off the cellular core of any cut board that is exposed, for instance, wh...

Best current price£6.28from Professional Building Supplies

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Professional Building Supplies£6.28Visit shop

Freefoam Black Ash Woodgrain Fascia End Cap - 315Mm

Visit shop

All Offers

2 offers from £6.28

View price history by clicking the chart icon.

Professional Building SuppliesFreefoam Black Ash Woodgrain Fascia End Cap - 315Mm

Free delivery in 1–3 days

£6.28

Visit shop

PVC Cladding UKFreefoam Black Ash Woodgrain Fascia End Cap - 315Mm

Free delivery in 1–3 days

£6.28

Visit shop

Product Information

Full details

The Freefoam 315mm Fascia End Cap (FWDCWGB) is an essential accessory for professional roofers and DIY homeowners looking to achieve a clean, weather-resistant finish on their fascia board installations. By sealing the exposed cellular core of cut boards, these end caps prevent moisture ingress and rot while providing a polished aesthetic; however, users must ensure they have the correct adhesive and activator on hand to ensure a secure, permanent bond.

All features

Model Part Number	FWDCWGB
Brand	Freefoam

Extended Product Information

FAQs

Can I use these on fascia boards from other brands?

These are designed for Freefoam systems, but may fit other 315mm PVC fascia profiles if the dimensions align. Always test fit before applying adhesive.

What type of glue should I use?

Use an industrial superglue specifically designed for cellular PVC, accompanied by the necessary activator spray.

Are these caps UV stable?

Yes, they are manufactured from high-quality PVC that is designed to resist fading and UV degradation.

Can I paint these end caps?

These are intended for use in their factory-finished state and are generally not recommended for painting.

What tools do I need for installation?

You will need a hacksaw for trimming and the required industrial superglue/activator kit.

Troubleshooting

End cap does not sit flush against the board.

Check the cut of the fascia board to ensure it is square. Trim the end cap further if the board has a slight protrusion.

Adhesive bond is weak or failing.

Ensure the surfaces were completely clean and dry before application. Re-apply using a fresh coat of industrial superglue and ensure sufficient activator is used.

Pros and Cons

Pros

Prevents water ingress into the fascia core
Easy to customize with basic hand tools
Matches standard 315mm fascia board profiles
Resistant to UV rays and environmental weathering

Cons

Requires specific industrial superglue and activator for application
Not suitable for load-bearing applications
Once bonded, removal is difficult without damaging the finish

Setup, Compatibility & Care

To install, ensure the cut end of your fascia board is clean, dry, and free of dust or debris. Measure the end cap against your board to confirm a flush fit; if necessary, trim the cap using a fine-toothed hacksaw. Apply an industrial-grade superglue and the corresponding activator to the interface between the cap and the board. Hold the end cap firmly in place for the duration recommended by the adhesive manufacturer to ensure a permanent bond. For care, simply wipe down the end cap with a soft cloth and mild soapy water if it becomes dirty; avoid harsh solvents that could damage the PVC surface.