Doncaster Cables Meter Tails Kit - 25mm2 Coil (3m) - Green
* 6181Y conforms to BS6004 * 6491X Green / Yellow earth cable conforms to BS EN 50525-2-31 * Class...* 6181Y conforms to BS6004 * 6491X Green / Yellow earth cable conforms to BS EN 50525-2-31 * Class 2 plain annealed copper conductor conforms to BS EN 60228 * Rated to 114 amps in BS7671 Table 4D1A * Minimum operating temperature -15degC * Maximum operating temperature 70degC Doncaster Cables Easi-Fit Flexible Meter Tails Kit 25mm2 Coil (3m)
Pre-cut and packaged PVC double insulated tails with associated single insulated earth wire.
Supplied is 2 x 25mm 19 Strand 6181Y cables and 1 x 16mm 6491X cable in 3 metre lengths.
Specifications
Insulation Material: PVC
Length: 3M
Easy to install Easy to strip Easy to terminate
This guide is for electricians and installers who need to understand and use the Doncaster Cables Meter Tails Kit - 25mm2 Coil (3m) - Green. The kit provides pre-cut and packaged PVC double insulated tails for easy installation. A key consideration is that proper electrical knowledge and adherence to safety regulations are essential when working with these cables.
All features
Colour
Green
Model Part Number
MTPF3
Brand
Doncaster Cables
Extended Product Information
FAQs
What standards do the cables comply with?
The 6181Y cables conform to BS6004, and the 6491X green/yellow earth cable conforms to BS EN 50525-2-31.
What is the maximum operating temperature?
The maximum operating temperature is 70°C.
What is the ampacity of the 25mm2 cable?
Rated to 114 amps in BS7671 Table 4D1A.
What is included in the kit?
The kit includes 2 x 25mm2 6181Y cables and 1 x 16mm 6491X cable, all in 3-meter lengths.
Can I use this kit for any type of electrical installation?
The kit is suitable for connecting the electricity meter to the consumer unit in domestic and commercial properties. Always refer to local electrical regulations to ensure compliance.
What is the insulation material?
The insulation material is PVC.
How long are the cables?
The cables are 3 meters long.
What is the minimum operating temperature?
-15°C.
Troubleshooting
Difficulty stripping the cable.
Use the correct cable stripping tool and ensure the blade is set to the appropriate depth to avoid damaging the conductors.
Connections are loose.
Ensure all terminals are properly tightened and that the correct torque is applied. Re-check the connections after a few days of operation.
Cables are overheating.
Check the load on the circuit and ensure it does not exceed the cable's ampacity. Check for any loose connections that may be causing resistance.
Pros and Cons
Pros
Easy to install due to pre-cut lengths and included earth wire.
Compliant with relevant British Standards, ensuring safety and quality.
Double insulation enhances safety during handling and operation.
Efficient power transfer due to the 25mm2 cable size.
Convenient 3-meter length suitable for various applications.
Cons
Requires proper electrical knowledge for safe installation.
May not be suitable for all types of installations.
The 3-meter length might be excessive for some applications, leading to wasted cable.
Requires appropriate tools for stripping and termination.
Setup, Compatibility & Care
Setup:
Ensure the power supply is isolated before beginning any work.
Refer to the wiring diagram and your local electrical regulations.
Strip the insulation from the cable ends using the appropriate tool.
Terminate the cables into the meter and consumer unit terminals.
Ensure all connections are secure and properly tightened.
Compatibility:
Compatible with standard electricity meters and consumer units.
Suitable for use in domestic and commercial properties.
Care:
Always handle cables with care to avoid damaging the insulation.
Do not exceed the maximum operating temperature of 70°C.
Ensure cables are protected from physical damage.
Regularly inspect the cables for any signs of wear and tear or damage.