Easton EC70 Aero Handlebars - 40cm - 31.8mm

The Easton EC70 Aero uses a standard 31.8mm clamp diameter.

Yes, the internal design is capable of accommodating electronic shifting wires.

Due to the flat aerodynamic top section, most standard clip-on aero bars are not compatible. Always check the specific compatibility requirements of your aero extensions.

The reach (80mm) is the distance from the center of the stem clamp to the farthest point of the bar, and the drop (125mm) is the vertical distance between the top of the bar and the bottom of the drops.

Yes, carbon assembly paste is highly recommended to ensure the bars stay secure at lower, safer torque values.

Ensure the clamping area is clean, re-apply high-quality carbon friction paste, and verify the torque spec is met using a calibrated torque wrench.

Use a professional cable routing tool or a thin fishing line and magnet kit to guide housing through the internal ports.