ProGRP External Corner - 3mtr

Yes, it can be painted with high-quality exterior-grade masonry or specialized GRP coatings, but it is typically supplied in a finished state.

Use a fine-tooth hacksaw for manual cutting or an angle grinder with a cutting disc for faster, cleaner cuts.

Yes, you should use standard polyester roofing resin along with glass fiber reinforcement tape (bandage) to ensure a chemically bonded, waterproof seam.

Yes, the ProGRP system is robust enough for both residential and commercial flat roofing applications.

Due to the length and rigidity, it is recommended to have two people carry the trim to avoid bowing and potential snapping.

Check that fixings are spaced no more than 300mm apart and that the trim is properly bedded into the adhesive layer.

Ensure that the GRP bandage has been fully saturated with resin and that there were no air bubbles trapped during the lamination process.

Check the timber substrate for levelness; if the substrate is uneven, use a plane or packing shims to create a flat surface for the trim to sit on.