Best current price£89.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£89.97Visit shop B&Q - Internal Oak Pre-Finished Suffolk Fire Door2040 X 926 X 44mm
Visit shop7 offers from £89.97 - £179.97
View price history by clicking the chart icon.
This pre-finished white oak fire door is designed for contractors and homeowners seeking a timely installation. Its key benefit is providing FD30 fire protection with minimal on-site finishing, though it requires specific hardware and linings for full certification. This door is part of the 'Oak Essentials' range and offers a classic Suffolk style in various sizes.
| Colour | White |
|---|---|
| Model Part Number | EPFOSUF27-FD |
| Brand | XL Joinery |
FD30 certification means the door is designed and tested to provide 30 minutes of fire resistance when installed correctly with appropriate fire-rated components.
This product typically refers to the door leaf only. Fire-rated hinges, locks, and other hardware must be purchased separately and must also be fire-rated.
Only the cut-outs for hardware and the edges of the door will require finishing. The main surfaces of the door are pre-finished.
While it might be possible, it is generally recommended to maintain the pre-finished appearance. If painting is necessary, ensure the surface is properly prepared and use a suitable paint. Always check manufacturer recommendations.
The door is crafted from American white oak.
Clean the door using a soft cloth dampened with water. Avoid harsh chemicals or abrasive materials.
This specific guide is for the white finish. Similar Suffolk fire doors may be available in other finishes, such as natural oak, depending on the manufacturer's range.
Check for obstructions in the frame, ensure hinges are correctly installed and aligned, and verify the door is not warped. Minor adjustments to hinges may be required.
Ensure all hardware and linings used are certified for FD30 fire protection and were installed according to manufacturer specifications. Re-check cut edges for proper sealing.
For pre-finished surfaces, clean gently with a damp cloth. For any damage to cut edges, use a compatible wood stain or sealant.
Setup: This door is pre-finished, meaning it is ready for installation with minimal preparation. Any necessary adjustments for hinges, handles, or locks should be made carefully, ensuring that the integrity of the fire rating is maintained. The edges of the door that are cut or trimmed will require finishing to match the pre-finished surface.
Compatibility: For the FD30 fire rating to be effective, this door *must* be installed with certified fire-rated linings and appropriate fire-rated hardware. Consult the manufacturer's specific guidelines for recommended hardware and frame types to ensure full compliance with fire safety regulations.
Care: To maintain the appearance of the pre-finished white oak, clean the door with a slightly damp cloth. Avoid using abrasive cleaners or excessive moisture, as this can damage the finish. For any touched-up areas on cut edges, use a suitable wood stain or finish that matches the original product.
