Shopping.co.uk

LATHE CUT OFF PARTING SYSTEM - 12mm Shank - RDGTOOLS

Not AvailableLATHE CUT OFF PARTING SYSTEM - 12mm Shank - RDGTOOLS

12MM SHANK PRO PARTING SYSTEM WITH 8% COBALT BLADE. THE BLADE MEASURES 1.5MM X 10MM X 80MM AND THE...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

Draper Variable Speed Wood Lathe - 250WFrom £227View product Lumberjack Starter Wood Lathe - SWL350From £160View product Lumberjack Tools Compact Wood Lathe - 550W, Variable SpeedFrom £360View product Holzmann Compact Metal Lathe - ED300ECOFrom £900View product

Product Information

Full details

This guide provides essential information for users of the RDGTOOLS 12mm Shank Parting System. Designed for use on a Myford-sized lathe, this system offers excellent clamping force for precise cutting. This guide covers setup, usage, and maintenance. Note that this guide assumes some familiarity with lathe operation.

All features

Model Part Number97405
BrandRDGTOOLS

Extended Product Information

FAQs

What type of material can I cut with this parting system?

This parting system can be used to cut a variety of materials including mild steel and aluminum. Adjust cutting parameters as needed.

How do I replace the blade?

Loosen the clamping screws on the holder, remove the old blade, insert the new blade, and tighten the screws securely. Ensure the blade is properly aligned.

What is the recommended cutting speed?

Cutting speed depends on the material being cut. Consult a cutting speed chart for the specific material you are using.

How should I store the parting system?

Store the parting system in a clean, dry place to prevent rust and damage.

What is the benefit of an 8% cobalt blade?

The 8% cobalt blade provides increased durability and wear resistance, which enhances cutting performance and extends the blade's lifespan.

Can this be used on lathes other than Myford?

The system is designed primarily for Myford-sized lathes. Compatibility with other lathes depends on the tool post size and the ability to accommodate a 12mm shank.

Troubleshooting

Poor Cutting Performance

Check the blade for sharpness and replace if necessary. Ensure the blade is correctly aligned and the cutting speed and feed rate are appropriate for the material.

Vibration During Cutting

Reduce the cutting speed, increase the feed rate, and check the clamping force to ensure the tool and workpiece are held securely. Ensure the blade overhang is minimal.

Blade Breaks Prematurely

Reduce cutting speed, check the material for hardness, ensure the blade is correctly aligned, and increase the feed rate. Check for excessive vibration.

Pros and Cons

Pros

  • High clamping force ensures precise cuts.
  • Durable 8% cobalt blade for extended use.
  • Compatible with Myford sized lathes, a common standard.
  • Designed for efficient and accurate parting operations.

Cons

  • Requires some level of experience with lathes.
  • Blade dimensions may not be suitable for all cutting tasks.
  • Requires proper setup and alignment for optimal performance.
  • Blade is a specific size and may need replacement.

Setup, Compatibility & Care

  1. Setup:
  • Ensure the lathe is powered off and the chuck is securely holding the workpiece.
  • Mount the 12mm shank holder in the tool post.
  • Securely clamp the 8% cobalt blade into the holder.
  • Precisely align the blade with the center of the workpiece using a center finder.
  1. Compatibility:
  • This system is specifically designed for Myford-sized lathes.
  • Check that the tool post can accommodate a 12mm shank.
  1. Care:
  • Always use appropriate cutting fluids to lubricate the blade and workpiece, prolonging the life of the blade and improving the cut quality.
  • Regularly check the blade for wear or damage.
  • Store the system in a clean and dry environment to prevent rust.