Draper Variable Speed Wood Lathe - 250W

You can use a variety of wood types, including hardwoods (oak, maple) and softwoods (pine, cedar).

The maximum turning diameter is 200mm.

The maximum turning length between centers is 300mm.

It includes 50mm and 150mm face plates, a 175mm tool rest, and a 3/4" drive spur.

The lathe has variable speed control, allowing adjustment from 750 to 3,200 rpm. Refer to the manual for specific instructions.

It features a no-volt overload safety switch to protect against overloads.

Use a brush or vacuum cleaner to remove wood dust. Wipe the surfaces with a damp cloth as needed.

Contact Draper or your local tool supplier for replacement parts.

Check the power supply and ensure the machine is plugged into a working 230V outlet. Check the no-volt overload safety switch.

Ensure the lathe is on a stable surface. Check and tighten all bolts. Make sure the workpiece is properly secured.

Reduce the cutting depth or slow down the speed. The motor may be overloaded; allow it to cool down and check for any obstructions.