VEVOR 6AN Fuel Line Kit - 20 FT - 12 Piece

This kit is designed for gasoline, diesel, and transmission fluid. Please verify specific fuel compatibility before using with ethanol-heavy mixtures.

While an AN wrench is recommended to prevent marring the finish on the fittings, standard adjustable wrenches can be used with caution.

The hose has a working pressure of 500 psi and a burst pressure rating of 2000 psi.

No, these lines are intended for fuel, oil, and transmission cooling systems and are not certified for high-pressure hydraulic brake applications.

Ensure the hose is fully pushed into the fitting socket until it hits the shoulder before tightening the outer housing to ensure a tight connection.

Ensure the hose was cut square and fully seated against the fitting nipple before tightening the collar.

Check for debris in the threads and apply a small amount of anti-seize or oil to the male end.

Wrap the area to be cut tightly with electrical tape before cutting to keep the braided layers intact.