HydroSure Flexible Garden Hose Pipe - 13mm x 30m - Black

The internal diameter of this HydroSure hose is 13mm (1/2").

The hose is manufactured free from harmful chemicals, but it is intended for garden use and not specifically certified for potable water.

You will need a 13mm (1/2") tap connector to attach the hose securely to your outdoor tap.

This hose can operate at high working pressures up to 4.5 bar.

The hose is manufactured with built-in reinforcement technology that helps it resist kinking and quickly return to its original shape when a kink occurs.

While the hose can handle pressures up to 4.5 bar, it is primarily designed for garden watering. Check the pressure requirements of your specific pressure washer accessory.

This specific product is 30m in length. Other lengths such as 50m and 100m are available in black, and a yellow variant is also offered.

Check that the tap is fully turned on. Ensure the hose is not kinked or blocked. Verify that the hose connector is securely attached to the tap and that the tap itself is functioning.

Tighten the hose connector at the tap or nozzle. Check the washer inside the connector for damage and replace if necessary. Ensure you are using a compatible 13mm connector.

Check for kinks or twists in the hose. Inspect the nozzle and hose end connectors for blockages. Ensure the tap is providing adequate water pressure.

Ensure the hose is properly drained and coiled for storage. Avoid leaving the hose under constant pressure when not in use. While designed for kink recovery, extreme or prolonged stress can affect its form.