Roland Black Series Microphone Cable - 25 ft.

The Roland RMC-B25 cable has a length of 7.5 meters (approximately 25 feet).

This cable features standard 3-pin XLR connectors on both ends: one male and one female.

While primarily designed for analog audio, the high-quality construction and shielding of the RMC-B25 can also support digital audio signals that utilize an XLR connection (like AES/EBU), provided the equipment is compatible.

A low-capacitance design ensures that the electrical signal travels through the cable with minimal loss or alteration of frequency content, preserving the full spectrum of sound and dynamic range.

Roland typically offers a lifetime guarantee on their Black Series microphone cables, reflecting their confidence in the product's durability and performance.

No, this cable is designed for microphone-level signals. Speaker connections typically require different types of cables, often with Speakon or 1/4" TS connectors, and are designed to handle higher power.

Ensure both ends of the cable are securely plugged into the correct devices. Check that the microphone and the receiving device are powered on and configured correctly. Test the cable with a different microphone or input to isolate the issue.

Verify that the cable is fully seated in its connectors. Ensure nearby electronic devices are not causing interference. If the problem persists, the cable may be damaged and require replacement.

Gently inspect the connectors for any damage or debris. Try wiggling the connectors slightly to see if the signal returns, which might indicate a loose internal connection. Consider replacing the cable if the issue is consistent.