Falcon HD Magnetic Wireless Camera System - 75" Screen Display Diagonal Inches

While professional installation is not strictly required due to the wireless design, some users may prefer it for optimal power wiring. Basic knowledge of vehicle electrical systems is beneficial.

The effective wireless range can vary depending on vehicle size and environmental interference. It is designed for in-vehicle use, typically performing best with a clear line of sight.

Yes, the camera can be wired to a constant 12V source to provide a continuous view, not just when reversing. This allows for constant monitoring.

The system typically uses a microSD card for DVR recording. Please refer to the product manual for specific compatibility and size recommendations.

The camera is designed for exterior use and should have some level of weather resistance. However, it is advisable to protect it from extreme conditions and direct, prolonged exposure to heavy rain or snow if possible.

The monitor usually turns on when it receives power. Depending on the wiring, it can be set to turn on with the ignition or specifically when the reverse gear is engaged.

Check that both the camera and monitor are properly powered. Ensure the wireless connection is established and there are no significant obstructions between them. Try re-pairing the camera and monitor.

Reposition the camera or monitor to improve the wireless signal strength. Ensure there are no other electronic devices causing interference. Check that the camera and monitor antennas are unobstructed.

Verify that a compatible microSD card is inserted correctly and has sufficient storage space. Check the DVR settings to ensure recording is enabled.

Clean the camera lens. Ensure the camera is securely mounted and not vibrating excessively. Check the monitor's display settings.