Sikkens Cetol HLS Plus Exterior Woodstain - Light Oak - 1L

For standalone use, apply three coats. When used with Cetol Filter 7 Plus, apply one coat of HLS Plus followed by two coats of Filter 7 Plus.

No, it is best applied on clean, bare wood surfaces for optimal results. Remove any old paint or coatings before application.

Yes, it can be used on decking. Make sure the decking is made from appropriate wood types and prepare it correctly before application.

Clean brushes and tools immediately after use with a suitable solvent, such as white spirit.

Drying times vary depending on environmental conditions. Allow each coat to dry completely before applying the next coat. Refer to the product label for specific drying times.

Yes, but ensure the treated wood is dry and the surface is properly prepared before application.

Ensure the surface was properly prepared before application. Remove the existing coating, sand the surface, and reapply the woodstain. Make sure to avoid applying the product on wood pre-treated with water-repellent substances containing wax, oil, or silicone.

Ensure even application and adequate coverage. Apply the woodstain in the direction of the wood grain. Multiple coats may be required for desired color and finish.

Ensure the application environment is within the recommended temperature and humidity range. Make sure there is sufficient ventilation. Remove any excess product.