Cables Direct Audio Cable - 1m White

The right-angled connectors allow the cable to plug into devices in tight spaces without bending sharply. This prevents strain on the cable and the device's port, reducing the risk of damage and improving cable management.

This indicates that both connectors on the cable are 3.5mm in size, and 'M/M' stands for Male-to-Male, meaning both ends have male plugs designed to be inserted into female ports.

Yes, this is a standard stereo audio cable designed to transmit stereo audio signals between compatible devices.

Gold-flashed connectors offer better conductivity for a cleaner audio signal and are more resistant to corrosion compared to standard connectors, which helps ensure a longer lifespan and consistent performance.

This cable is designed for stereo audio output and input. While some microphones use a 3.5mm connection, this cable may not be suitable for all microphone types, especially those requiring mono or specific impedance matching.

The cable length is 1 meter (approximately 3.3 feet).

The product color is white.

Ensure both 3.5mm connectors are fully inserted into their respective ports. Check that the source device's volume is up and not muted. Test the cable with different devices to rule out a faulty port on one of the connected units. Inspect the cable for any visible damage.

Clean the 3.5mm connectors on both the cable and the device ports with a dry, lint-free cloth. Ensure the cable is not routed near sources of electromagnetic interference (e.g., power adapters, Wi-Fi routers). The gold-flashed connectors should minimize this, but debris can still affect contact.

While the right-angled connector is designed for tight spaces, some exceptionally thick device cases might still pose a challenge. Try removing the case or using a different cable if this is a persistent issue.