Bullnose Fascia End Cap Pair - Freefoam - FMREC

The Bullnose fascia end cap pair by Freefoam is designed for professional roofing installations. M...

Best current price£2.10from Professional Building Supplies

All Offers

3 offers from £2.10 - £4,801.30

View price history by clicking the chart icon.

Professional Building SuppliesFreefoam White Bullnose Fascia End Cap Pair - 100Mm X 25Mm
Free delivery in 1–3 days
£2.10
Visit shop
PVC Cladding UKFreefoam White Bullnose Fascia End Cap Pair - 100Mm X 25Mm
Free delivery in 1–3 days
£2.10
Visit shop

Product Information

Full details

The Freefoam Bullnose Fascia End Cap Pair (FMREC) is an essential component for professional roofers and DIY enthusiasts looking to achieve a clean, professional finish on bullnose fascia installations. These 100mm end caps provide a secure and aesthetically pleasing closure for 18mm thick boards, effectively weatherproofing the exposed ends of your fascia runs. While they offer excellent durability and a seamless look, users should ensure they are working with the specific 18mm bullnose profile, as they are not cross-compatible with standard square-edged fascia systems.

All features

Model Part NumberFMREC
BrandFreefoam

Extended Product Information

FAQs

Can I use these on square-edged fascia boards?

No, these end caps are specifically molded for the bullnose profile and will not fit correctly on standard square-edged boards.

What is the maximum width of fascia board these caps can cover?

These end caps are compatible with bullnose fascia boards ranging from 150mm up to 250mm in width.

Do I need a backing board with these caps?

No, the bullnose fascia system is designed to be fixed directly to the rafter ends, negating the need for a backing board.

What size nails should I use to install them?

You should use 65mm polytop nails for all fixing points along the rafters.

Are these caps UV resistant?

Yes, Freefoam products are designed for exterior use and are built to be resistant to environmental weathering and UV exposure.

Troubleshooting

End cap feels loose after installation

Verify that the fascia board being used is exactly 18mm thick and that the cap is pushed fully onto the end profile.

Difficulty aligning with the soffit board

Ensure the soffit board is fully inserted into the rear rebate of the fascia board before finalizing the end cap attachment.

Pros and Cons

Pros

  • Provides a clean, professional finish to rooflines
  • Easy to install on rafter-fixed bullnose boards
  • Weather-resistant construction for long-term protection
  • Integrated rebate simplifies soffit board attachment

Cons

  • Not compatible with standard square-edged fascia boards
  • Limited to 18mm thick fascia board profiles
  • Requires specific 65mm polytop nails for proper installation

Setup, Compatibility & Care

To install these end caps, first ensure your bullnose fascia boards are installed with a maximum rafter spacing of 600mm. Secure the boards using 65mm polytop nails, two per rafter, to maintain adequate load-bearing capacity. If you are installing soffits, slide the board into the rebate located at the bottom rear edge of the bullnose fascia before locking the end cap into position. For care and maintenance, simply clean the end caps periodically with a mild detergent and water to remove dirt or debris; avoid using abrasive scrubbers or harsh chemical solvents that could damage the finish.

Similar items

Price History

DatePrice
Visit shop