Regatta Waterproof Changing Robe - Blue - L/XL

ISOTEX 20000 refers to the waterproof and breathable rating of the fabric. 20,000mm indicates its waterproofness (how much water pressure it can withstand before leaking), and 20,000 g/m²/24 hours indicates its breathability (how much water vapor can pass through the fabric in a day).

Yes, you can machine wash it. Always use a gentle cycle with cold water and a technical wash for waterproof garments. Avoid fabric softeners and bleach, as they can damage the fabric's waterproof properties.

The description states a 'grown on hood with faux fur trim,' which typically means the faux fur is permanently attached to the hood and not easily removable. Please refer to the specific care label for detailed washing instructions for the trim.

The robe provides significant warmth with its fleece lining and excellent wind/water protection. For extremely cold conditions, it works best as an outer layer over warm clothing. Its primary function is post-activity warmth and changing rather than extreme cold weather expedition wear.

The outer shell is made from 100% polyester stretch fabric with an ISOTEX 20000 membrane and a Durable Water Repellent (DWR) finish. The inner lining is a warm borg fleece, also made from polyester.

This guide covers the L/XL size. Regatta changing robes are generally designed to be loose-fitting to allow for easy changing underneath. If you are typically an L or XL in adult sizing, this robe should provide a comfortable and functional fit. For detailed measurements, consult the manufacturer's sizing chart if available.

The Durable Water Repellent (DWR) finish may have worn off. Wash the robe with a technical cleaner, then re-apply a spray-on or wash-in DWR re-proofing treatment suitable for breathable waterproof fabrics.

Ensure the robe is thoroughly aired out and hung in a well-ventilated space immediately after use. Avoid leaving it crumpled. If it smells, wash according to care instructions, ensuring a complete dry cycle afterwards.

Clean any dirt or sand from the zipper teeth using a small brush and mild soap. If still stiff, apply a specialized zipper lubricant (silicone-based) to the teeth, avoiding the fabric.