HG Tile Protector is an easily applicable liquid polymer emulsion for all types of floor tiles, fl...HG Tile Protector is an easily applicable liquid polymer emulsion for all types of floor tiles, flagstones and slate. When dry, this emulsion forms a glossy, super-thin yet extremely strong protective film, which protects tiles against stains, dirt, scratches and wear, while also enhancing the colour and structure. This protective film also gives an anti-slip effect. This unique and easy to apply tile finish polymer emulsion forms a shiny and wafer-thin, yet extremely protective coating. HG tile protector also deepens the colour and structure of the floor tiles. 1 litre is sufficient for approximately 40 m per layer. It forms a slightly glossy, super thin strong protective film that protects tiles against stains. The product is multi-coloured and comes in a 1 litre size.
This guide is for anyone looking to protect their floor tiles, flagstones, or slate with HG Tile Protector. The product provides a glossy, protective film that shields against stains, dirt, scratches, and wear while enhancing the color and structure of the tiles. Keep in mind that while it offers anti-slip properties, proper cleaning and maintenance are still necessary for optimal results.
All features
Colour
White
Model Part Number
14
Brand
HG
Extended Product Information
FAQs
How do I apply HG Tile Protector?
Apply a thin, even layer using a sponge or applicator, ensuring full coverage.
How long does it take for HG Tile Protector to dry?
Drying time depends on environmental conditions, but allow for sufficient drying time before use.
Can I use this product on walls?
No, this product is designed for floor tiles, flagstones, and slate only.
How often should I reapply the protector?
Reapply as needed to maintain the protective film and desired shine.
What kind of cleaner should I use?
Use a pH-neutral cleaner to clean the protected tiles.
How much area does one liter of HG Tile Protector cover?
One liter is sufficient for approximately 40 square meters per layer.
Can I use this on tiles with a special finish?
It is suitable for most tile types; however, it's always best to test in an inconspicuous area first.
Troubleshooting
Uneven application or streaks appear after drying.
Ensure a thin, even layer during application. If streaks appear, apply a second thin coat after the first has dried completely.
Tiles appear dull or lack shine after application.
Make sure you have cleaned the tiles properly. This might also indicate that multiple coats are needed to achieve the desired effect. In this case, apply a second coat after the first has dried completely.
Product is not adhering properly.
Ensure that the surface is completely clean and dry before application. Old wax layers can prevent adhesion.
Pros and Cons
Pros
Protects tiles against stains, dirt, scratches and wear.
Enhances the color and structure of the tiles.
Provides an anti-slip effect for added safety.
Easy to apply with a simple liquid polymer emulsion.
Suitable for a variety of tile types.
Offers good coverage with one liter covering approximately 40 square meters per layer.
Cons
Requires proper cleaning and maintenance for optimal results.
May require multiple coats for enhanced protection.
Results may vary depending on the tile type and condition.
Not intended for use on walls.
The anti-slip effect may diminish over time with wear.
Setup, Compatibility & Care
Preparation: Before applying, clean the tiles thoroughly with a suitable tile cleaner, ensuring the surface is free of dirt, grease, and old wax layers. Allow the tiles to dry completely.
Application: Apply HG Tile Protector in a thin, even layer using a sponge, cloth, or applicator. Ensure that you cover the entire surface uniformly to prevent streaks or unevenness.
Drying: Allow the product to dry completely. Drying time may vary depending on environmental conditions (humidity, temperature). Avoid walking on the treated surface until completely dry.
Compatibility: HG Tile Protector is compatible with all types of floor tiles, flagstones, and slate.
Care: Regularly clean the protected tiles with a pH-neutral cleaner. Avoid abrasive cleaners or scrubbing pads that could damage the protective film. Reapply the protector as needed to maintain protection and shine.