Everbuild Stick2 Contact Adhesive Spray - 500ml - Beige

Everbuild Stick2 Contact Adhesive Spray bonds to wood, concrete, stone, tiles, rubber, foam, metals, rigid plastics, canvas fabrics, cardboard, paper, and cork.

Yes, it is suitable for both internal and external applications.

The adhesive usually becomes tacky within 1-3 minutes, depending on environmental conditions.

Excess adhesive can be cleaned up with a solvent appropriate for the materials being bonded. Always test in an inconspicuous area first.

The adhesive is halogen and CFC-free. Always use in a well-ventilated area and follow the manufacturer's safety instructions.

Store in a cool, dry place away from direct sunlight and extreme temperatures.

While it can be used on porous materials, it is important to apply enough adhesive to achieve the bond. Sometimes multiple coats may be required.

Ensure both surfaces are clean, dry, and free of contaminants. Make sure you've applied a sufficient amount of adhesive and allowed it to become tacky before joining the materials. Also, check the expiration date.

Clean the nozzle after use by turning the can upside down and spraying for a few seconds. If it's clogged, try removing the nozzle and soaking it in solvent.

Shake the can well before each use. Apply the adhesive in even, sweeping motions, maintaining a consistent distance from the surface.