Johnstone's Woodstain - Brown

Yes, but it's essential to prepare the surface by cleaning and lightly sanding to ensure the new stain adheres properly. Remove any loose or flaking paint or stain.

The quick-drying formula allows for touch-dry in a few hours, but it's best to wait at least 4-6 hours before applying a second coat. Always refer to the product label for specific drying times.

It provides all-weather protection, including resistance to rain, sun (UV rays), and general wear and tear, extending the life of your wooden surfaces.

Yes, it is designed for both interior and exterior use. Its water-repellent properties make it ideal for outdoor applications like decking and fences.

Clean brushes and applicators immediately after use with a suitable solvent, such as white spirit, as recommended on the product label.

One coat will provide protection and color, but two coats are recommended for a richer color and improved durability. Always allow the first coat to dry before applying the second.

It is best applied to bare wood. If previously finished, ensure the surface is properly prepared by cleaning, sanding, and removing any loose finishes before application.

Work in a well-ventilated area, wear appropriate protective gear like gloves and eye protection, and avoid inhaling vapors. Keep out of reach of children and pets. Refer to the product label for complete safety information.

Ensure the wood surface is properly prepared, and apply the woodstain evenly, following the wood grain. Multiple thin coats are better than one thick coat.

Ensure adequate ventilation and that the temperature is within the recommended range. Check for any moisture on the wood surface before application.

Test the woodstain on a hidden area of the wood to check the color match. Wood type affects final color.

Ensure the product is fully dry, and apply a second coat if necessary for increased durability.